💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well SUS01M-15 DC-DC Converter - 1W - 10.8~13.2V in 15V out

SKU SUS01M-15
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

SUS01M-15 is the model of this series: rated power 1W, typical efficiency 82%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

SUS01M-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC OUTPUT VOLTAGE
15V
OUTPUT CURRENT RANGE
0 ~ 67mA
EFFICIENCY
82%
RATED POWER
1W
RIPPLE & NOISE (max.)Note.2
100mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
50KHz min.

INPUT

VOLTAGE RANGE
10.8 ~ 13.2V
NORMAL VOLTAGE
12V
INPUT CURRENT Full load
112mA
INPUT CURRENT No load
11mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
700khrs min. MIL-HDBK-217F(25℃)
DIMENSION
22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
PACKING
3.1g ; 22 pcs/per tube, 3080 pcs/ 140 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SUS01M-15 Mechanical Specification Unit: mm
Mechanical Specification Unit: mm
SUS01M-15 Packing
Packing

Downloads

FAQ

Can I use the SUS01M-15 for low-power 15V analog or instrumentation circuits?

It can work for low-power 15V circuits when the available source is within the stated 10-13VAC input range. The unit provides a constant 15V output and is rated for 1W total, with a maximum output current of 0.07A. That makes it suitable for light instrumentation or interface loads rather than larger 15V devices.

Is the SUS01M-15 a good fit for embedded control boards that need a small 15V rail?

Yes, for compact embedded designs that need a very low-power 15V rail, this model can be a fit. Its body measures 22.6 × 9.9 × 8.9 mm and weighs 0.0031 kg, which supports space-constrained assemblies. The load still needs to stay within the 1W and 0.07A output limits.

Can this model power a 15V industrial signal-conditioning module?

It can if the module needs constant 15V and its power demand does not exceed 1W. The maximum output current is 0.07A, so it is aimed at small signal-conditioning or control electronics instead of higher-consumption industrial hardware. Input conditions also need to match the 10-13VAC specification.

Will the SUS01M-15 handle cold or warm equipment enclosures?

The specified operating range is -25°C to +71°C, so the temperature envelope is clearly defined for protected equipment operation. The provided specs do not list any IP rating, so environmental sealing is not specified. On that basis, temperature suitability is stated, but outdoor exposure suitability is not.

What are the differences between the SUS01M-15 and the other SUS01M versions?

The listed sibling models are SUS01M-05 at 1W and 5V with 200A, SUS01M-09 at 1W and 9V with 111A, and SUS01M-12 at 1W and 12V with 0.08A. The SUS01M-15 version provides 15V output at 0.07A and is also rated at 1W. Across the series, the key differences are the output voltage and listed output current.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442850541867, "variants" :[{ "context":"default", "variant_id": 45713060757803, "sku":"SUS01M-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SUS01M-15 DC-DC Converter - 1W - 10.8~13.2V in 15V out
Mean Well

Mean Well SUS01M-15 DC-DC Converter - 1W - 10.8~13.2V in 15V out

Log in to see price

SUS01M-15 is the model of this series: rated power 1W, typical efficiency 82%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top