💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SUS01O-09 DC-DC Converter - 1W - 43.2~52.8V in 9V out

SKU SUS01O-09
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

SUS01O-09 is the model of this series: rated power 1W, typical efficiency 77%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

SUS01O-09Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC OUTPUT VOLTAGE
9V
OUTPUT CURRENT RANGE
0 ~ 111mA
EFFICIENCY
77%
RATED POWER
1W
RIPPLE & NOISE (max.)Note.2
100mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
50KHz min.

INPUT

VOLTAGE RANGE
43.2 ~ 52.8V
NORMAL VOLTAGE
48V
INPUT CURRENT Full load
28mA
INPUT CURRENT No load
3mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
700khrs min. MIL-HDBK-217F(25℃)
DIMENSION
22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
PACKING
3.1g ; 22 pcs/per tube, 3080 pcs/ 140 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SUS01O-09 Mechanical Specification Unit: mm
Mechanical Specification Unit: mm
SUS01O-09 Packing
Packing

Downloads

FAQ

Can I use the SUS01O-09 for a 9V rail in embedded or industrial electronics powered from 43.2~52.8VAC?

Yes, this unit is intended for 43.2~52.8VAC input applications that need a regulated 9V constant-voltage output. Its 1W rating makes it more appropriate for low-power embedded or industrial electronics than for higher-demand devices.

Is the SUS01O-09 suitable for low-power automation sensors or interface circuits that require 9V?

It can be used for low-power automation sensors or interface circuits that need a stable 9V supply and stay within the 1W rating. The compact 22.6 × 9.9 × 8.9 mm size also supports use in space-constrained assemblies.

Would this converter make sense for small 9V control sections inside equipment cabinets?

Yes, it is suited to small 9V control sections inside equipment cabinets when the source falls in the 43.2~52.8VAC range. The constant-voltage output is intended for electronics that expect a fixed 9V rail.

Can this model be used in outdoor automation equipment?

The datasheet details an operating temperature range of -25°C to +71°C, which covers its stated thermal operating limits. Since no IP rating is shown, the listing does not establish outdoor or direct-exposure suitability.

How does the SUS01O-09 differ from the other SUS01O output variants?

All listed SUS01O siblings are 1W converters with 43.2~52.8VAC input and 22.6 × 9.9 × 8.9 mm dimensions, but they provide different outputs: SUS01O-05 is 5V and 200A, SUS01O-09 is 9V and 111A, SUS01O-12 is 12V and 0.08A, and SUS01O-15 is 15V and 0.07A. Selection within the group comes down to the required output voltage and its matching current spec.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442855063851, "variants" :[{ "context":"default", "variant_id": 45713077338411, "sku":"SUS01O-09", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SUS01O-09 DC-DC Converter - 1W - 43.2~52.8V in 9V out
Mean Well

Mean Well SUS01O-09 DC-DC Converter - 1W - 43.2~52.8V in 9V out

SUS01O-09 is the model of this series: rated power 1W, typical efficiency 77%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product