💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SUS01O-15 DC-DC Converter - 1W - 43.2~52.8V in 15V out

SKU SUS01O-15
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

SUS01O-15 is the model of this series: rated power 1W, typical efficiency 83%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

SUS01O-15Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC OUTPUT VOLTAGE
15V
OUTPUT CURRENT RANGE
0 ~ 67mA
EFFICIENCY
83%
RATED POWER
1W
RIPPLE & NOISE (max.)Note.2
100mVp-p
LINE REGULATIONNote.3
±1.2% for 1% input variation
LOAD REGULATIONNote.4
±8.0%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
50KHz min.

INPUT

VOLTAGE RANGE
43.2 ~ 52.8V
NORMAL VOLTAGE
48V
INPUT CURRENT Full load
28mA
INPUT CURRENT No load
3mA
FILTER
Capacitor type
PROTECTION
Fuse recommended

PROTECTION

OVERLOAD
Momentary Protection type : Broken
SHORT CIRCUIT
Momentary Protection type : Broken

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE
80pF max.
EMC EMISSION
Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A, EAC TP TC 020

OTHERS

MTBF
700khrs min. MIL-HDBK-217F(25℃)
DIMENSION
22.6*9.9*8.9mm or 0.89"*0.39"*0.35" inch (L*W*H)
PACKING
3.1g ; 22 pcs/per tube, 3080 pcs/ 140 tube/per carton
Test conditions and notes4
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 20% to 100% rated load.

Technical drawings

SUS01O-15 Mechanical Specification Unit: mm
Mechanical Specification Unit: mm
SUS01O-15 Packing
Packing

Downloads

FAQ

Can I use the SUS01O-15 to power a low-power 15V circuit in industrial or automation equipment?

Yes, this converter is intended for low-power 15V constant-voltage applications that operate from 43.2~52.8VAC input. Its 1W rating and 0.07A output current make it appropriate for small auxiliary or interface circuits.

Is the SUS01O-15 suitable for embedded 15V sections inside compact devices?

It can fit embedded 15V sections where only 1W is required and space is limited. The 22.6 × 9.9 × 8.9 mm size supports use in compact assemblies and dense electronics layouts.

Would this model work for a small 15V signal-conditioning or control stage?

It is a reasonable fit for a small 15V signal-conditioning or control stage when the source is within 43.2~52.8VAC. Because the output is constant voltage and limited to 0.07A, it is intended for light electronic loads.

Can the SUS01O-15 be used where ambient temperatures swing below freezing or above typical room temperature?

The published operating range is -25°C to +71°C, so it is specified for both below-freezing and elevated-temperature conditions within that band. No IP rating is provided, so the environmental data does not establish outdoor or moisture-exposed use.

How does the SUS01O-15 compare with the other output options in the SUS01O series?

The listed SUS01O siblings all have 1W power, 43.2~52.8VAC input, and 22.6 × 9.9 × 8.9 mm dimensions, but they differ by output: SUS01O-05 is 5V and 200A, SUS01O-09 is 9V and 111A, SUS01O-12 is 12V and 0.08A, and SUS01O-15 is 15V and 0.07A. This makes the output voltage and matching current spec the main factual difference across the group.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442856407339, "variants" :[{ "context":"default", "variant_id": 45713083957547, "sku":"SUS01O-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well SUS01O-15 DC-DC Converter - 1W - 43.2~52.8V in 15V out
Mean Well

Mean Well SUS01O-15 DC-DC Converter - 1W - 43.2~52.8V in 15V out

SUS01O-15 is the model of this series: rated power 1W, typical efficiency 83%.

Features

  • 1500VDC I/O isolation
  • Internal SMD technology
  • Built-in EMI filter
  • Cooling by free air convection
  • Non-conductive plastic case
  • Dual in line package
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product