Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
ENVO SRP-2305N-10CC100-500 DT6 CC Driver, 10W, 100-500mA, NFC Control
Log in to see priceOverview
SRP-2305N-10CC100-500 is the 3-42V output model of this series: rated power Max. 10W.
Features
- In compliance with IEC 62386-101:2014, IEC 62386-102:2014, IEC 62386-207 Ed2，
- Built-in DALI-2 interface, DALI DT6 device
- Dimmable LED driver. Max. output power 10W
- 100-500mA current selectable via NFC program tool. Min.current gear lower to 0.1mA
- DALI Address/Group/Scene setting via NFC program tool.
- Class Ⅱ power supply, full isolated plastic case
- High power factor and efficiency
- To switch and dim LED lighting luminaries
- Amplitude/CCR dimming, smooth and deep dimming
- Compatible with universal DALI masters that support DT6 commands
- Error report function
- IP20 rating, suitable for indoor LED lighting applications
- 5 years warranty
Specifications
Output
- LED Channel
- 1
- DC Voltage
- 3-42V
- Current
- 100-500mA via NFC setting; Min.current gear lower to 0.1mA
- Current Accuracy
- ±3% (±1% @ certain full load) @ full load
- Rated Power
- Max. 10W
Input
- Voltage Range
- 200-240VAC/176-280VDC
- Frequency Range
- 0/50/60Hz
- Power Factor (Typ.)
- > 0.94 @ 230VAC Full load
- Total Harmonic Distortion
- THD ≤ 15% (@ full load / 230VAC)
- Efficiency (Typ.)
- ＞80% @ 230VAC full load
- AC Current (Typ.)
- 0.1A @ 230VAC
- Inrush Current (Typ.)
- Max. 4.32A at 230VAC; 80μs duration
- Leakage Current
- < 5mA /230VAC
- Standby Power Consumption
- ＜0.5W
- Anti Surge
- L-N:2KV
Control
- Dimming Interface
- DALI Device Type 6 (DALI consumption < 2mA) / AC Push
- Dimming Range
- 0.01%-100% @ max current
- Dimming Method
- Amplitude/CCR dimming
- Dimming Curve
- Linear/ Logarithmic optional
Protection
- Short Circuit
- Yes, recovers automatically after fault condition is removed
- Over Current
- Yes, recovers automatically after fault condition is removed
- Over Temperature
- Yes, recovers automatically after temperature drop
Environment
- Working Temp.
- -25℃ ~ +45℃
- Max. Case Temp.
- TC=85℃ (Ta=45℃)
- Working Humidity
- 10% ~ 95% RH non-condensing
- Storage Temp. & Humidity
- -40℃ ~ +80℃, 10% ~ 95% RH
Safety & EMC
- Safety Standards
- EN61347-1, EN61347-2-13
- Withstand Voltage
- I/P-O/P: 3.75KVAC
- Isolation Resistance
- I/P-O/P: 100M Ohms / 500VDC / 25℃ / 70% RH
- EMC Emission
- EN55015, EN61000-3-2, EN61000-3-3
- EMC Immunity
- EN61547, EN61000-4-2,3,4,5,6,8,11
Others
- MTBF
- 191350H, MIL-HDBK-217F @ 230VAC full load and 25℃ ambient temperature
- Dimension
- 101x36x25mm (L*W*H)
- Warranty
- 5 Years
Technical drawings
Downloads
Datasheet1
FAQ
What kind of LED driver is the ENVO DALI2 DT6 CC Driver SRP-2305N-10CC100-500?
This model is a constant current LED driver designed for applications that use DALI dimming control. It is rated at 10W and supports an output current range of 100-500mA. The listed output voltage is 3-42V.
Is this a constant current or constant voltage driver?
The SRP-2305N-10CC100-500 is a constant current driver. That makes it suitable for LED loads that are specified by drive current rather than fixed output voltage. Its adjustable current range is 100-500mA.
Does this driver support DALI dimming?
Yes, this model is identified as a DALI2 DT6 constant current driver and its dimming control is listed as DALI. It is intended for projects where DALI-based lighting control is required. Buyers looking for a non-DALI driver should compare it against models with different control types.
What applications is this 10W driver best suited for?
This model is best suited for lower-power constant current LED lighting applications where DALI control is needed. Its 10W rating and 100-500mA current range make it a fit for compact commercial or architectural LED fixtures that match those electrical requirements. It is generally selected when controllability matters more than higher wattage capacity.
What operating temperature range does this driver support?
The specified ambient temperature range for this model is -25°C to +45°C. That makes it suitable for many indoor and controlled-environment lighting applications within that range. If your project will see temperatures outside those limits, a different driver should be considered.
Does this model include NFC control?
Yes, this model includes NFC control. It allows for current selection (100-500mA) and DALI address/group/scene settings via an NFC program tool. This feature enables configuration without requiring power to the driver during setup.
What warranty is offered for this LED driver?
The listed warranty period for the SRP-2305N-10CC100-500 is 5 years. That gives buyers a defined support window for commercial purchasing and maintenance planning. Warranty terms and claim conditions would still depend on the seller's policy.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SRP-2305N Models
5 other models| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| ENVO SRP-2305N-45CC500-1400 DT6 CC Driver, 45W, 500-1400mA, NFC Control | 45W | 58V | 0.5A | IP20 | View |
| ENVO SRP-2305N-65CC500-1500 DT6 CC Driver, 65W, 500-1500mA, NFC Control | 65W | 58V | 0.5A | IP20 | View |
| ENVO SRP-2305N-36CC350-1050 DT6 CC Driver, 36W, 350-1050mA, NFC Control | 36W | 60V | 0.35A | IP20 | View |
| ENVO SRP-2305N-25CC250-700 DT6 CC Driver, 25W, 250-700mA, NFC Control | 25W | 58V | 0.25A | IP20 | View |
| ENVO SRP-2305N-15CC100-700 DT6 CC Driver, 15W, 100-700mA, NFC Control | 15W | 42V | 0.1A | IP20 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
