Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDD02N-12 DC-DC Converter - 2W - 21.6~26.4V in ±12V out 83mA

SKU MDD02N-12

Log in to see price Trade pricing & online ordering for account holders

End of Life, Succeeded by MDD02N-12N

Available to order

Overview

MDD02N-12 is the ±12V output model of this series: rated power 2W, typical efficiency 82%.

MDS02 and MDD02 series are 2W isolated and unregulated module type medical grade DC-DC converter with SIP 7 package. It features international standard pins, a high efficiency up to 8 5 %, wide working temperature range -40~+ 85℃, 6 KVDC or 4 . 2KVAC I/P-O/P hight isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 5V/12V/ 15V for single output and ±5V /±9 V/±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +85℃
Medical safety approved (1xMOPP/2xMOOP) according to ANSI/AAMI ES60601-1
Low patient leakage current <2μA
Protection: Short circuit(3 second max.)
6KVDC or 4.2VAC hight I/O isolation (Reinforced isolation)
Low cost
3 years warranty

Specifications

MDD02N-12Specifications from the official datasheet (2022-05-24 edition)

INPUT

INPUT VOLTAGE (RANGE): Normal 24V (21.6 ~ 26.4V)
INPUT CURRENT NO LOAD: 11mA
INPUT CURRENT FULL LOAD: 103mA
VOLTAGE RANGE: 21.6 ~ 26.4Vdc
SURGE VOLTAGE (100ms max.): 5Vin models : 9Vdc 12Vin models : 18Vdc 24Vin models : 30Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

OUTPUT VOLTAGE: ±12V
OUTPUT CURRENT: ±9 ~ 83mA
EFFICIENCY (TYP.): 82%
CAPACITOR LOAD (MAX.)^{* For each output}: *220μF
VOLTAGE ACCURACY: ±5.0%
RATED POWER: 2W
RIPPLE & NOISE^Note.2: 75mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±10%
SWITCHING FREQUENCY (Typ.): 100KHz

PROTECTION

SHORT CIRCUIT: 3 second max.

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +85℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 85℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.6)

SAFETY STANDARDS: UL60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC or 4.2KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC, 50/60Hz
ISOLATION CAPACITANCE (Typ.): 5pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55011(CISPR11) Class B
Radiated BS EN/EN55011(CISPR11) Class B
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±8KV contact

Parameter	Standard	Test Level
Conducted	BS EN/EN55011(CISPR11)	Class B
Radiated	BS EN/EN55011(CISPR11)	Class B

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±8KV contact

OTHERS

MTBF: 3500Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.5*9.8*12.5mm (0.77*0.386*0.492 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 4.2g ; 25pcs/per tube, 3000pcs/120 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDD02N-12 Mechanical Specification — Mechanical Specification

MDD02N-12 EMC Suggestion — EMC Suggestion

Typical applications

Medical devices
Medical oxygen monitor
CT scanning
Medical carts
Oral care equipment

Downloads

Certificates3

Mean Well E227340 UL Certificate PDF Download

Mean Well MDD01-02- LVD Certificate PDF Download

Mean Well MDD01-02-UK-dec Certificate PDF Download

Test reports1

Mean Well MDD02N-12 Test Report PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the MDD02N-12 in a 24V industrial control cabinet that needs isolated +/-12V rails for analog or interface circuits?

It can fit 24V-class control systems that stay within the converter's 21.6~26.4Vdc input range and need an unregulated +/-12V output. The available output is 2W total with up to 83mA per output, so it is suited to low-power analog, sensing, or interface sections rather than heavier loads.

Is the MDD02N-12 appropriate for embedded control boards that need a small +/-12V auxiliary supply?

This model is sized for compact embedded designs because it provides 2W in a 19.5 x 9.8 x 12.5 mm package. Its unregulated +/-12V output and 0.0042 kg weight make it a fit for low-power onboard auxiliary rails where space is limited.

Can this converter be used for low-power instrumentation or signal-conditioning circuits in automation equipment?

Yes, it is aligned with low-power instrumentation use where a +/-12V rail is needed and the load stays within 2W and 83mA per output; note the output is unregulated (load regulation ±10%). The -40°C to +85°C operating range also supports use in demanding industrial temperature conditions.

Is the MDD02N-12 suitable for outdoor equipment or washdown environments?

The listed specs do not include an IP rating, so this converter should not be treated as outdoor- or washdown-rated by itself. Its environmental data is the -40°C to +85°C operating range; enclosure-level protection would need to come from the host system.

How does the MDD02N-12 compare with the other MDD02N models?

Within the MDD02N series, all models are 2W parts with 21.6~26.4V input and different outputs: MDD02N-05 is +/-5V, +/-20~200mA; MDD02N-09 is +/-9V, +/-12~111mA; MDD02N-12 is +/-12V, +/-9~83mA; and MDD02N-15 is +/-15V, +/-7~67mA. The main selector in this group is the output voltage and output current for the required rail.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDD02N-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA	2W	15V	0 Milliampere	IP20	View
Mean Well MDD02N-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0 Milliampere	IP20	View
Mean Well MDD02N-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02M-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA	2W	15V	0.0667A	IP20	View
Mean Well MDD02M-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0.0833A	IP20	View
Mean Well MDD02M-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02L-15N SIP Package DC-DC Converter- 2W - ±15V Out 67mA	2W	15V	0.0667A	IP20	View
Mean Well MDD02L-12N SIP Package DC-DC Converter- 2W - ±12V Out 83mA	2W	12V	0.0833A	IP20	View
Mean Well MDD02L-05N SIP Package DC-DC Converter- 2W - ±5V out 200mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDD02N-15 DC-DC Converter - 2W - 21.6~26.4V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02N-09 DC-DC Converter - 2W - 21.6~26.4V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02N-05 DC-DC Converter - 2W - 21.6~26.4V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View
Mean Well MDD02M-15 DC-DC Converter - 2W - 10.8~13.2V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02M-12 DC-DC Converter - 2W - 10.8~13.2V in ±12V out 83mA	2W	12V	0.083A	IP20	View
Mean Well MDD02M-09 DC-DC Converter - 2W - 10.8~13.2V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02M-05 DC-DC Converter - 2W - 10.8~13.2V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View
Mean Well MDD02L-15 DC-DC Converter - 2W - 4.5~5.5V in ±15V out 67mA	2W	15V	0.067A	IP20	View
Mean Well MDD02L-12 DC-DC Converter - 2W - 4.5~5.5V in ±12V out 83mA	2W	12V	0.083A	IP20	View
Mean Well MDD02L-09 DC-DC Converter - 2W - 4.5~5.5V in ±9V out 111mA	2W	9V	111 Milliampere	IP20	View
Mean Well MDD02L-05 DC-DC Converter - 2W - 4.5~5.5V in ±5V out 200mA	2W	5V	200 Milliampere	IP20	View

Please log in to write a review.

{ "id":8442604912939, "variants" :[{ "context":"default", "variant_id": 45711587344683, "sku":"MDD02N-12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }