Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MPS-30-15 Power Supply 30W 15V 2A

SKU MPS-30-15

Log in to see price Trade pricing & online ordering for account holders

End of Life, Succeeded by RPS-30-15

Available to order

Overview

MPS-30-15 is the 15V output model of this series: rated current 2A, rated power 30W, typical efficiency 76%.

Features

Universal AC input / Full range
Low leakage current <200μA
Protections: Short circuit / Overload / Over voltage / Over temperature
Medical safety approved (2 x MOPP between primary to secondary)
Fixed switching frequency at 100KHz
Low cost
High reliability
3 years warranty

Specifications

MPS-30-15Specifications from the official datasheet (2021-09-15 edition)

OUTPUT

DC VOLTAGE: 15V
RATED CURRENT: 2A
CURRENT RANGE: 0 ~ 2A
RATED POWER: 30W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE TOLERANCE^Note.3: ±3.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±1.0%
SETUP, RISE TIME: 500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
HOLD UP TIME (Typ.): 70ms/230VAC 12ms/115VAC at full load

INPUT

VOLTAGE RANGE: 88 ~ 264VAC auto switch 120 ~ 370VDC
FREQUENCY RANGE: 47 ~ 63Hz
EFFICIENCY (Typ.): 76%
AC CURRENT (Typ.): 0.8A/115VAC 0.5A/230VAC
INRUSH CURRENT (Typ.): COLD START 30A/230VAC
LEAKAGE CURRENT: Earth leakage current < 200μA/264VAC

PROTECTION

OVERLOAD: Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 16.5 ~ 20.25V Protection type : Hiccup mode, recovers automatically after fault condition is removed
OVER TEMPERATURE: Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.: -10 ~ +60℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -20 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS: ANSI/AAMI ES60601-1, TUV EN60601-1, IEC60601-1 approved
ISOLATION LEVEL: Primary-Secondary: 2xMOPP, Primary-Earth:1xMOPP
WITHSTAND VOLTAGE: I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:SHORT
ISOLATION RESISTANCE: I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3
EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN60601-1-2, medical level, criteria A

OTHERS

MTBF: 547Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 101.6*65.8*23.5mm (L*W*H)
PACKING: 0.16Kg; 90pcs/15.8Kg/1.06CUFT

Test conditions and notes5

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on http://www.meanwell.com)
5. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm this deviation that does not affect basic safety or essential performance.

Technical drawings

MPS-30-15 Mechanical Specification — Mechanical Specification

MPS-30-15 Derating Curve — Derating Curve

Downloads

Catalogues1

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the MPS-30-15 for a 15V industrial control panel load?

It is designed for constant-voltage 15V DC output and can supply up to 2A, with a total power limit of 30W. That makes it suitable for 15V control, interface, or automation devices that stay within those output limits.

Is this power supply appropriate for a 15V embedded system or test fixture?

Yes, if the equipment requires a regulated 15V DC source and draws no more than 2A. The wide 88-264VAC input also helps when the fixture or embedded system may be deployed across different AC mains environments.

Can this model power a small 15V automation accessory or sensor hub?

It can be used for 15V automation loads that fit within 30W and 2A. For applications with higher inrush or sustained current demand above 2A, this model would be undersized.

Is the MPS-30-15 suitable for outdoor or harsh-environment use?

The listed operating temperature range is -10°C to +60°C, so it is specified for that temperature window. No IP rating is provided in the specs, so it should not be treated as a sealed outdoor power supply based on the available product data.

How does the MPS-30-15 compare with the other 30-series MPS models?

Within the smaller MPS family, the nearby variants are MPS-30-5 at 25W, 5V, 5A; MPS-30-12 at 30W, 12V, 2.5A; MPS-30-24 at 28.8W, 24V, 1.2A; MPS-30-27 at 29.7W, 27V, 1.1A; and MPS-30-48 at 28.8W, 48V, 0.6A. The MPS-30-15 version sits in that group at 30W, 15V, 2A.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well MPS-30-5 Power Supply 30W 5V 5A	25W	5V	5A	View
Mean Well MPS-30-48 Power Supply 30W 48V 600mA	28.8W	48V	0.6A	View
Mean Well MPS-30-27 Power Supply 30W 27V 1.1A	29.7W	27V	1.1A	View
Mean Well MPS-30-24 Power Supply 30W 24V 1.2A	28.8W	24V	1.2A	View
Mean Well MPS-30-12 Power Supply 30W 12V 2.5A	30W	12V	2.5A	View

Please log in to write a review.

{ "id":8430809547051, "variants" :[{ "context":"default", "variant_id": 45664078692651, "sku":"MPS-30-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well MPS-30-15 Power Supply 30W 15V 2A

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Technical drawings

Downloads

Catalogues1

FAQ

Payment & Security

Other MPS-30 Models

Write a review

Your cart

Mean Well MPS-30-15 Power Supply 30W 15V 2A

Features

Company Information

Services and Support

Choose options