💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well NSD15-48D12 DC-DC Converter - 14.88W - 18~72V in ±12V out 620mA

SKU NSD15-48D12
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

NSD15-48D12 is the 12V -12V output model of this series: rated current 0.62A 0.62A, rated power 14.88W, typical efficiency 84%.

Features

  • Wide 4:1 DC input range
  • Protections: Short circuit / Overload / Over voltage
  • 1500VDC I/O isolation
  • Built-in EMI filter
  • Cooling by free air convection
  • Output voltage trimming function
  • Built-in remote ON-OFF control
  • 100% full load burn-in test
  • Lost cost
  • High reliability
  • 2 years warranty

Specifications

NSD15-48D12Specifications from the official datasheet (2024-10-30 edition)

OUTPUT

DC VOLTAGE
12V -12V
RATED CURRENT
0.62A 0.62A
CURRENT RANGE
0.03 ~ 0.62A 0.03 ~ 0.62A
RATED POWER
14.88W
CAPACITIVE LOAD (max.)
±1000uF
RIPPLE & NOISE (max.)Note.2
100mVp-p(25% ~ 100% load)
VOLTAGE TOLERANCENote.3
±2.5%
LINE REGULATION
±1.0% at 10% ~ 100% load
LOAD REGULATION
±1.0%
TRIM OUTPUT (Typ.)
±5.0%
SETUP TIME
100ms/RATED DC INPUT at full Load

INPUT

RATED DC INPUT
48VDC
VOLTAGE RANGENote.6
18 ~ 72VDC
EFFICIENCY (Typ.)
84%
DC CURRENT
0.4A/48VDC
SHUTDOWN IDLE CURRENT
20mA

PROTECTION

OVERLOAD
Above 105% rated output power Protection type : Over power limiting, recovers automatically after fault condition is removed
OVER VOLTAGE(CLAMP)
13.8 ~ 18V -13.8 ~ -18V
SHORT CIRCUITNote.4
Recovers automatically after fault condition is removed

FUNCTION

ON/OFF CONTROL
Logic "1" or open circuit : ON Logic "0" or short to PIN2 : OFF

ENVIRONMENT

WORKING TEMP.
-25 ~ +70℃
WORKING HUMIDITY
0% ~ 95% RH max.
STORAGE TEMP., HUMIDITY
-40 ~ +85℃, 0 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0~50℃)

SAFETY & EMC (Note 5)

SAFETY STANDARDS
UL62368-1, EAC TP TC 004 approved, Design refer to BS EN/EN62368-1
ISOLATION VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 (CISPR32) Class B, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,6,8; BS EN/EN55035, light industry level, EAC TP TC 020

OTHERS

MTBF
9469.6K hrs min. Telcordia SR-332 (Bellcore) ; 1673.2K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
50.8*38.1*9.82mm (2"*1.5"*0.387") (L*W*H)
PACKING
0.03Kg; 180pcs/6.4Kg/0.94CUFT
Test conditions and notes8
  1. 1. All parameters NOT specially mentioned are measured at 12, 48VDC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Short circuit no more than 60 seconds.
  5. 5. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.” (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf )
  6. 6. Derating to 80% load is needed for NSD15-48D series at 18Vdc input voltage. Full output wattage can be acquired when the input voltage is higher than 20Vdc.
  7. 7. EMC filter suggestion:
  8. 8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Technical drawings

NSD15-48D12 Mechanical Specification
Mechanical Specification
NSD15-48D12 Block Diagram
Block Diagram
NSD15-48D12 Derating Curve
Derating Curve

Downloads

FAQ

Can I use the NSD15-48D12 for equipment that needs a ±12V rail from a higher-voltage input source?

Yes, if the equipment is designed for constant-voltage ±12V output and the load stays within 14.88W. This model accepts 18~72V input, so it is intended for higher-input systems than the 9.4~36V versions.

Is this DC-DC converter suitable for industrial analog or signal-conditioning circuits that require ±12V?

It can fit industrial analog or signal-conditioning electronics that require a constant ±12V output and stay within the 14.88W rating. The 18~72V input range is relevant where the available source voltage is already in that higher band.

Can the NSD15-48D12 be used in automation systems with an 18~72V input bus?

Yes, if the automation system needs a constant ±12V output and the connected load remains within 14.88W. Full output is available above 20V input; at 18V input the load must be derated to 80%.

Is the NSD15-48D12 rated for outdoor use or only controlled environments?

The specified operating temperature is -25°C to +70°C. No IP rating is listed, so the specifications do not confirm suitability for direct outdoor exposure or wet locations.

How does the NSD15-48D12 compare with other NSD15 models?

The NSD15-D family includes 9.4~36V input and 18~72V input models, with outputs of ±5V at 1.5A and 15W, ±12V at 0.62A and 14.88W, and ±15V at 0.5A and 15W. The NSD15-48D12 is the 18~72V input, ±12V, 14.88W version. Compared with the 9.4~36V NSD15-12D12, its main difference is the higher specified input range.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8442637746475, "variants" :[{ "context":"default", "variant_id": 45711732310315, "sku":"NSD15-48D12", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well NSD15-48D12 DC-DC Converter - 14.88W - 18~72V in ±12V out 620mA
Mean Well

Mean Well NSD15-48D12 DC-DC Converter - 14.88W - 18~72V in ±12V out 620mA

Log in to see price

NSD15-48D12 is the 12V -12V output model of this series: rated current 0.62A 0.62A, rated power 14.88W, typical efficiency 84%.

Features

  • Wide 4:1 DC input range
  • Protections: Short circuit / Overload / Over voltage
  • 1500VDC I/O isolation
  • Built-in EMI filter
  • Cooling by free air convection
  • Output voltage trimming function
  • Built-in remote ON-OFF control
  • 100% full load burn-in test
  • Lost cost
  • High reliability
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top