💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well PLC-100-36 Power Supply 100W 36V - PFC 2.65A

screw terminalfully isolated plastic casesuitable for signage applications
SKU PLC-100-36
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

PLC-100-36 is the 36V output model of this series: rated current 2.65A, rated power 95.4W, typical efficiency 88%.

Features

  • Universal AC input / Full range
  • High efficiency up to 88.5%
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Built-in active PFC function
  • Class 2 power unit
  • Pass LPS
  • 100% full load burn-in test
  • High reliability
  • Suitable for LED lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • 2 years warranty

Specifications

PLC-100-36Specifications from the official datasheet (2026-06-15 edition)

OUTPUT

DC VOLTAGE
36V
CONSTANT CURRENT REGIONNote.4
27 ~ 36V
RATED CURRENTNote.6
2.65A
CURRENT RANGENote.6
0 ~ 2.65A
RATED POWERNote.6
95.4W
RIPPLE & NOISE (max.)Note.2
150mVp-p
VOLTAGE ADJ. RANGE(Vo ADJ)
30.6 ~ 36V
CURRENT ADJ. RANGE(Io ADJ)
2 ~ 2.65A
VOLTAGE TOLERANCENote.3
±2.0%
LINE REGULATION
±1.0%
LOAD REGULATION
±2.0%
SETUP, RISE TIME
500ms, 80ms/230VAC 1200ms, 80ms/115VAC at full load
HOLD UP TIME (Typ.)
60ms/230VAC 16ms/115VAC at full load

INPUT

VOLTAGE RANGENote.5
90 ~ 264VAC 127 ~ 370VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.95/115VAC, PF>0.95/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧75% at 115VAC/230VAC input
EFFICIENCY (Typ.)
88%
AC CURRENT (Typ.)
20V ~ 48V:1.1A/115VAC 0.55A/230VAC
INRUSH CURRENT (Typ.)
COLD START 40A(twidth=950μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 5 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 240VAC

PROTECTION

OVER CURRENT (Typ.)Note.4
95 ~ 102% Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
39 ~ 48V Protection type : Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
-30 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDSNote.7
UL1310, TUV BS EN/EN60950-1, BS EN/EN61347-1, BS EN/EN61347-2-13, GB/T19510.1,GB/T19510.213, CAN/CSA C22.2 No. 223-M91(except for 48V), EAC TP TC 004 approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, GB/T 17743, GB17625.1, BS EN/EN61000-3-2,-3, Class C (≧70% load) ; BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55035, light industry level, (surge 4KV), EAC TP TC 020

OTHERS

MTBF
2688.3K hrs min. Telcordia SR-332 (Bellcore) ; 297.9Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
200.5*69.5*35mm (L*W*H)
PACKING
0.52Kg; 25pcs/14Kg/0.65CUFT

Certifications & ratings

Marked features
LPS, PFC
Test conditions and notes11
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Please refer to "DRIVING METHODS OF LED MODULE".
  5. 5. Derating may be needed under low input voltage. Please check the static characteristics for more details.
  6. 6. This is the maximum possible output current and power. Over load protection may be activated slightly below this level to comply with the requirement of UL1310 class 2.
  7. 7. Safety and EMC design refer to BS EN/EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
  8. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  9. 9. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  10. 10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  11. 11. PLC-100-12 is used for any light source that exempt from the ErP-Directive (EU) 2019/2020 requirement, for example this model could be use for signalling products (including, but not limited to road-, railway-, marineorair traffic-signalling , traffic control or airfield lamps).

Technical drawings

PLC-100-36 Mechanical Specification
Mechanical Specification
PLC-100-36 Block Diagram
Block Diagram
PLC-100-36 Derating Curve
Derating Curve
PLC-100-36 Power Factor Characteristic
Power Factor Characteristic
PLC-100-36 EFFICIENCY vs LOAD (48V Model)
EFFICIENCY vs LOAD (48V Model)

Downloads

FAQ

What is the output rating of the Mean Well PLC-100-36?

The PLC-100-36 is a 36V power supply from the 100W PLC-100 series, with a rated power of 95.4W and rated current of 2.65A. It is designed for applications that need a stable 36V DC output from a universal 90~264VAC input range.

What types of applications is the PLC-100-36 suitable for?

This model is an LED power supply suited to LED lighting and moving sign applications. Its built-in constant current limiting circuit in C.V.+C.C. mode also makes it relevant for loads that benefit from controlled current behavior.

Does the Mean Well PLC-100-36 include power factor correction?

Yes, the PLC-100-36 includes a built-in PFC circuit. The datasheet states a typical PF greater than 0.95 at full load on 115VAC and 230VAC input, which is useful in commercial and industrial environments where power quality matters.

Is the PLC-100-36 a dimmable LED driver?

No, this model does not include dimming control. The datasheet lists no dimming function, so buyers needing integrated dimming should compare it with other driver models that specifically support that feature.

What operating temperature range is specified for this power supply?

The listed operating temperature range is -30°C to 50°C, with load derating at higher temperatures per the derating curve. That makes the PLC-100-36 suitable for a wide range of indoor and protected-environment applications, provided the surrounding conditions stay within that specified range.

What protections are built into the Mean Well PLC-100-36?

This model includes over current protection (constant current limiting), over voltage protection and over temperature protection. Those built-in safeguards help support reliability in demanding LED power applications.

Is the PLC-100-36 compatible with applications that require a Class 2 power unit?

Yes, the datasheet lists UL1310 (Class 2) among its safety standards and the unit carries the LPS mark. That can make it a fit for projects or equipment specifications that call for those classifications, subject to the rest of the system requirements.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8423873249579, "variants" :[{ "context":"default", "variant_id": 45636312138027, "sku":"PLC-100-36", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well PLC-100-36 Power Supply 100W 36V - PFC 2.65A
Mean Well

Mean Well PLC-100-36 Power Supply 100W 36V - PFC 2.65A

Log in to see price

PLC-100-36 is the 36V output model of this series: rated current 2.65A, rated power 95.4W, typical efficiency 88%.

Features

  • Universal AC input / Full range
  • High efficiency up to 88.5%
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • Built-in active PFC function
  • Class 2 power unit
  • Pass LPS
  • 100% full load burn-in test
  • High reliability
  • Suitable for LED lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top