Mean Well XLG-75-12-A Power Supply 75W 12V - Adjustable 5A

Yes. The XLG-75-12-A is IP67-rated, making it suitable for use inside outdoor enclosures, sign boxes, and wet-area installations. Its 12V output and 60W capacity are appropriate for 12V LED strip lighting in exterior architectural, landscape, or sign lighting applications.

The XLG-75-12-A delivers 60W at 12V. For a 12V strip rated at 9.6W/m, this allows approximately 6.25 meters at full load, or about 5 meters derated to 80% for continuous duty. Always check your strip's rated watts per meter and apply the 80% derating rule for reliable long-term operation.

Yes. The XLG-75-12-A has an operating temperature range of -40°C to +90°C, covering extreme cold environments such as cold storage rooms, outdoor signs in northern climates, and refrigerated display cabinets fitted with 12V LED strip lighting.

Yes. The IP67 rating means the driver is fully sealed against dust and protected against temporary immersion, making it an appropriate choice for damp utility areas, commercial kitchen under-cabinet lighting, and other wet-rated LED strip applications. Ensure local codes are met for placement relative to water sources.

Yes. The XLG-75-12-A can supply up to 60W across one or more parallel 12V LED strip segments, provided the combined load does not exceed 60W (and ideally stays at or below 48W for continuous use). Its compact 140 × 63 × 32 mm form factor fits inside typical display case wiring enclosures.

Both units are 60W, 12V, 5A IP67 drivers with the same dimensions and input range. The XLG-75-12-AB adds a dimming control input (the -AB suffix denotes adjustable and dimmable), whereas the XLG-75-12-A has adjustable output current but no dedicated external dimming interface.