Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SKMW30F-05 DC-DC Converter - 30W - 9~36V in 5V out 6A

SKU SKMW30F-05

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SKMW30F-05 is the 5V output model of this series: rated power 30W, typical efficiency 90%.

SKMW30 and DKMW30 series are 30W isolated and regulated module type DC-DC converter with DIP 1"x1" package. It features international standard pins, a high efficiency up to 90%, wide working temperature range -40~+85℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit, overload, over temperature, input under voltage protection, remote ON/OFF and trimmable output voltage etc. The models account for different input voltage 9~36V and 18~75V 4:1 ultrawide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.

Features

DIP 1"x1" package with industry standard pinout
4:1 ultrawide input range
Operating temperature range -40 ~ +85℃
No minimum load required
Comply to BS EN/EN55032 radiated Class A without additional components
High efficiency up to 90%
Protections: Short circuit (Continuous) / Overload / Over voltage / Over temperature / Input under voltage
1.5KVDC I/O isolation
Remote ON/OFF control and Triming output (±10%)
3 years warranty

Specifications

SKMW30F-05Specifications from the official datasheet (2024-04-30 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): 24V (9 ~ 36V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 1400mA
OUTPUT VOLTAGE: 5V
OUTPUT CURRENT: 0~6000mA
EFFICIENCY (TYP.): 90%
CAPACITOR LOAD (MAX.)^{* For each output}: 6000μF

INPUT

VOLTAGE RANGE: 9~36Vdc ,
SURGE VOLTAGE (100ms max.): 24Vin models : 50Vdc, 48Vin models : 100Vdc
FILTER: Pi type
PROTECTION: Fuse recommended. 24Vin models: 6A delay time Type, 48Vin models: 3A delay time Type
INTERNAL POWER DISSIPATION: 500mW

OUTPUT

VOLTAGE ACCURACY: ±1.5%
RATED POWER: 30W
RIPPLE & NOISE^Note.2: 3.3/5Vout models: 75mVp-p, other models:100mVp-p
LINE REGULATION^Note.3: ±0.2%
LOAD REGULATION^Note.4: Single output models: ±0.2%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.): 3.3/5Vout models: 270KHz, other models: 330KHz
EXTERNAL TRIM ADJ. RANGE (Typ.): ±10% (Single output model only)

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 170% rated output power Protection type : Recovers automatically after fault condition is removed
OVER VOLTAGE: Protection type : Clamp by diode
OVER TEMPERATURE: Shut down o/p voltage, recovers automatically after temperature goes down

FUNCTION

UNDER VOLTAGE LOCKOUT Start-up voltage: 24Vin (F-type): 8.8Vdc, 48Vin (G-type): 17Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage: 24Vin (F-type): 8Vdc, 48Vin (G-type): 16Vdc
REMOTE CONTROL: Power ON: R.C. ~ -Vin >3.5~75Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1.2Vdc or short

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +85℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.03% / ℃ (0 ~ 60℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 1500pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class A
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 2, 3A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class A

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line-Line
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 2, 3A/m

OTHERS

MTBF: 3.3/5Vout models: 860Khrs, Other models: 1170Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 25.4*25.4*10.2mm (1*1*0.4 inch)
CASE MATERIAL: Black coated copper with non-conductive base
PACKING: 19.2g ; 12pcs/per tube, 600pcs/50 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(F:24Vdc, G:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SKMW30F-05 SKMW30 & DKMW30 series — SKMW30 & DKMW30 series

SKMW30F-05 SKMW30 & DKMW30 series (2) — SKMW30 & DKMW30 series (2)

SKMW30F-05 Plug Assignment — Plug Assignment

Typical applications

Downloads

Certificates2

Certificate (SKMW30-DKMW30-CE-dec)(EN) PDF Download

Certificate (SKMW-DKMW30-UK-dec)(EN) PDF Download

Test reports1

Test Report (SKMW30F-05)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SKMW30F-05 for 5V industrial controllers or single-board computers?

Yes, this converter delivers a constant 5V output and is rated for 30W with up to 6A output current. That makes it relevant for 5V control and computing loads that need more current headroom.

Is the SKMW30F-05 suitable for powering 5V USB-class electronics inside OEM equipment?

It can be suitable for 5V electronics when the load requires a regulated 5V rail and stays within 6A and 30W. The compact 25.4 × 25.4 × 10.2 mm form factor also helps in space-constrained OEM designs.

Can this model support 5V automation peripherals from a 9-36VDC source range?

Yes, the specified input range is 9-36VDC, and the output is constant 5V at up to 6A. It is intended for 5V peripherals or subsystems that fit within the 30W rating.

How does the SKMW30F-05 compare with other converters in the SKMW30F family?

The SKMW30F-05 is a 30W converter with 5V output at 6A. The other listed SKMW30F models are 3.3V at 7.5A for the SKMW30F-03, 12V at 2.5A for the SKMW30F-12, and 15V at 2A for the SKMW30F-15. All share the same 30W series rating.

Can the SKMW30F-05 be used where temperatures swing from very low to very high?

The operating temperature range is -40°C to +85°C, so it is specified for a wide temperature window. No IP rating is provided, so the environmental sealing level is not defined by the listed specs.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SKMW30W8-15 30W DC-DC Converter 15VDC 2A	30W	15V	2A	IP20	View
Mean Well SKMW30W8-12 30W DC-DC Converter 12VDC 2.5A	30W	12V	2.5A	IP20	View
Mean Well SKMW30G-15 DC-DC Converter - 30W - 18~75V in 15V out 2A	30W	15V	2A	IP20	View
Mean Well SKMW30G-12 DC-DC Converter - 30W - 18~75V in 12V out 2.5A	30W	12V	2.5A	IP20	View
Mean Well SKMW30G-05 DC-DC Converter - 30W - 18~75V in 5V out 6A	30W	5V	6A	IP20	View
Mean Well SKMW30G-03 DC-DC Converter - 30W - 18~75V in 3.3V out 7.5A	30W	3.3V	7.5A	IP20	View
Mean Well SKMW30F-15 DC-DC Converter - 30W - 9~36V in 15V out 2A	30W	15V	2A	IP20	View
Mean Well SKMW30F-12 DC-DC Converter - 30W - 9~36V in 12V out 2.5A	30W	12V	2.5A	IP20	View
Mean Well SKMW30F-03 DC-DC Converter - 30W - 9~36V in 3.3V out 7.5A	30W	3.3V	7.5A	IP20	View

Please log in to write a review.

{ "id":8442786611499, "variants" :[{ "context":"default", "variant_id": 45712748773675, "sku":"SKMW30F-05", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }