Over 15 years experience of providing support of MEAN WELL Power Supplies
The MSP-300 is a 300W Mean Well power converter (input range: 85~264VAC).
Key Features
- ✓ Input voltage range: 85~264VAC
- ✓ DC output voltage adjustable ±10%
- ✓ 4KVAC reinforced I/O isolation
- ✓ Protections: Overload / Over voltage / Over temperature
- ✓ Active PFC — meets international energy efficiency regulations
- ✓ DC OK relay contact output
- ✓ Remote ON/OFF control
- ✓ Safety approvals: ISOLATION LEVEL
- ✓ 3 years warranty
-
BrandMean Well
-
SeriesMSP Series
-
Power Rating300 Watt
-
Output Voltage7.5 Volt
-
Rated Current40 Ampere
-
Input Voltage85V~264V
-
Standards MetCB,CE,EAC,UL
-
Operation ModeConstant Voltage
-
Operating Temperature-40°C~70°C
-
Warranty5 Year
-
Length19.9 cm
-
Width10.5 cm
-
Height4.1 cm
-
Weight0.95 kg
::specification::
Frequently Asked Questions
Can I use the MSP-300-7.5 for a 7.5V industrial controller or legacy electronics load?
Yes, when the equipment specifically requires a constant voltage 7.5V DC source, this model provides up to 300W and 40A. It is best suited to industrial or embedded systems that are built around a 7.5V power rail rather than 5V, 12V, or 24V.
Is the MSP-300-7.5 a good fit for 7.5V test benches or lab fixtures in production environments?
It can be used where the fixture or device under test needs a stable 7.5V constant voltage input and the total load stays within 300W and 40A. That makes it relevant for production or service environments built around equipment with a defined 7.5V requirement.
Can the MSP-300-7.5 support 7.5V automation or embedded assemblies with higher current demand?
Yes, this unit is intended for loads that need 7.5V at higher current, with a rated output of 40A and 300W. It is a better match for 7.5V assemblies with substantial current demand than lower-capacity siblings in the same voltage.
Is the MSP-300-7.5 suitable for outdoor or washdown locations?
The operating temperature range is -40°C to +70°C, so the thermal range is broad for industrial use. However, no IP rating is listed in the provided specs, so it should be treated as a power supply for protected environments rather than exposed outdoor or washdown areas.
What are the differences between the 7.5V MSP models?
For 7.5V output, the sibling models are MSP-100-7.5 at 101.3W and 13.5A, MSP-200-7.5 at 200.3W and 26.7A, MSP-300-7.5 at 300W and 40A, MSP-450-7.5 at 450W and 60A, and MSP-600-7.5 at 600W and 80A. This model is the mid-range 7.5V option at 300W and 40A.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other MSP-300 Models
7 other models| Model | Power | Voltage | Current | |
|---|---|---|---|---|
| Mean Well MSP-300-5 Power Supply 300W 5V 60A | 300W | 5V | 60A | View |
| Mean Well MSP-300-48 Power Supply 336W 48V 7A | 336W | 48V | 7A | View |
| Mean Well MSP-300-36 Power Supply 324W 36V 9A | 324W | 36V | 9A | View |
| Mean Well MSP-300-3.3 Power Supply 198W 3.3V 60A | 198W | 3.3V | 60A | View |
| Mean Well MSP-300-24 Power Supply 336W 24V 14A | 336W | 24V | 14A | View |
| Mean Well MSP-300-15 Power Supply 330W 15V 22A | 330W | 15V | 22A | View |
| Mean Well MSP-300-12 Power Supply 324W 12V 27A | 324W | 12V | 27A | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
