💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well PCD-60-700B Power Supply 60W 700mA

TRIAC dimmableplastic casing IP42Class II design without FGconstant current
SKU PCD-60-700B
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
In stock
|

Overview

PCD-60-700B is the model of this series: rated current 700mA, rated power 60.2W, typical efficiency 86%.

Features

  • AC phase-cut dimming
  • Work with leading edge and trailing edge TRIAC dimmers
  • Built-in active PFC function
  • Constant current design
  • Protections: Short circuit / Over temperature
  • Cooling by free air convection
  • Fully isolated plastic case
  • IP42 design
  • Class Ⅱ power unit, no FG
  • Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
  • 100% full load burn-in test
  • Low cost
  • High reliability
  • 3 years warranty

Specifications

PCD-60-700BSpecifications from the official datasheet (2024-09-25 edition)

OUTPUT

RATED CURRENT
700mA
OPERATING VOLTAGE RANGE
50 ~ 86V
CURRENT ACCURACY
±5.0%
RATED POWER
60.2W
RIPPLE & NOISE (max.)Note.1
5.6Vp-p
NO LOAD OUTPUT VOLTAGE (max.)
100V
SETUP TIME
500ms / 230VAC at full load

INPUT

VOLTAGE RANGE
180~295VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.9/230VAC, PF>0.9/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧60%(PCD-60-500B loading≧65%)at 230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)
86%
AC CURRENT (Typ.)
0.6A/230VAC 0.5A/277VAC
INRUSH CURRENT(Typ.)
COLD START 13A (twidth=50μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
32 units (circuit breaker of type B) / 32 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.5mA / 240VAC

PROTECTION

SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed.
OVER TEMPERATURE
Shut down o/p voltage, auto-recovery

ENVIRONMENT

WORKING TEMP.
-30 ~ +45℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, EAC TP TC 004,IP42 approved
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC
ISOLATION RESISTANCE
I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C ; BS EN/EN61000-3-3,EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, light industry level(Surge 2KV), criteria B,EAC TP TC 020

OTHERS

MTBF
3910.3K hrs min. Telcordia SR-332 (Bellcore) 358.0Khrs min. MIL-HDBK-217F (25℃)
DIMENSION
128*60*31.5mm (L*W*H)
PACKING
0.35Kg;30pcs/11.5Kg/0.58CUFT
Test conditions and notes5
  1. 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  2. 2. Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
  3. 3. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  4. 4. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  5. 5. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Technical drawings

PCD-60-700B Mechanical Specification
Mechanical Specification
PCD-60-700B Block Diagram
Block Diagram
PCD-60-700B Power Factor Characteristic
Power Factor Characteristic
PCD-60-700B P C D - 6 0 series
P C D - 6 0 series

Downloads

FAQ

Can the PCD-60-700B be used for LED downlights that need 700mA drive current?

Yes, this driver is designed for constant current LED loads at 700mA, which is a common drive level for many LED downlight engines. The compatible load also needs to fall within the 50-86V CC output range. Because it is a constant current driver, it should be matched to fixtures that specify constant current rather than constant voltage input.

Is the PCD-60-700B suitable for signage modules or small LED arrays?

It can be suitable for signage modules or small LED arrays when the LED load is built for 700mA constant current and the total forward voltage is within 50-86V. The 60.2W rating supports larger constant current LED assemblies than lower-power models in the series. It is not meant for constant voltage LED products that expect a fixed DC output.

Can I use this driver for a linear LED light engine with multiple LEDs in series?

Yes, the 50-86V CC range makes it relevant for linear or compact LED engines that place multiple LEDs in series and require 700mA. That combination can suit higher-voltage LED arrays more naturally than lower-voltage, higher-current modules. The final fit still depends on the array's total forward voltage at 700mA.

How many LEDs can the PCD-60-700B run?

There is no single fixed LED count because the number of LEDs depends on the forward voltage of each LED in the load. For compatibility, the load must require 700mA constant current and have a total forward voltage within the 50-86V CC range. This is different from sizing a constant voltage power supply, where the output voltage is fixed and the current draw is set by the load.

What is the difference between the PCD-60-700B and the other PCD-60 versions?

Across the PCD-60 series, PCD-60-500B is 500mA with a 70-108V CC range and 54W, PCD-60-700B is 700mA with a 50-86V range and 60.2W, PCD-60-1050B is 1050mA with a 34-57V range and 59.85W, PCD-60-1400B is 1400mA with a 25-43V range and 60.2W, PCD-60-1750B is 1750mA with a 20-34V range and 59.5W, PCD-60-2000B is 2000mA with an 18-30V range and 60W, and PCD-60-2400B is 2400mA with a 15-25V range and 60W. This 700mA version sits between the higher-voltage 500mA model and the lower-voltage, higher-current variants. The correct choice depends on the LED module's required current and forward-voltage range.

Can the PCD-60-700B be used where temperature or enclosure conditions are a concern?

The stated operating temperature range is -30°C to +45°C, and the enclosure is rated IP42. That makes it more appropriate for indoor LED applications where moderate ingress protection is acceptable. If the environment is more exposed, the IP42 rating is the first limit to review.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8421021942059, "variants" :[{ "context":"default", "variant_id": 45622431187243, "sku":"PCD-60-700B", "inventory_qty" : 6, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well PCD-60-700B Power Supply 60W 700mA
Mean Well

Mean Well PCD-60-700B Power Supply 60W 700mA

Log in to see price

PCD-60-700B is the model of this series: rated current 700mA, rated power 60.2W, typical efficiency 86%.

Features

  • AC phase-cut dimming
  • Work with leading edge and trailing edge TRIAC dimmers
  • Built-in active PFC function
  • Constant current design
  • Protections: Short circuit / Over temperature
  • Cooling by free air convection
  • Fully isolated plastic case
  • IP42 design
  • Class Ⅱ power unit, no FG
  • Suitable for LED related fixture or appliance (such as LED Decoration or Advertisement devices)
  • 100% full load burn-in test
  • Low cost
  • High reliability
  • 3 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top