Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
IOB-15-05A is the 5V output model of this series: rated current 2.8A, rated power 14W, typical efficiency 77%.
The IOB-15 series is a compact and reliable AC-DC open frame power module featuring high efficiency and low power consumption. It is particularly well-suited for space-constrained applications with stringent energy efficiency requirements. The product features a compact design and supports universal input voltage range of 85~305Vac. With ultra-low standby power consumption <0.25W, it is energy efficiency and eco-friendly. It also offers an ultra-wide operating temperature range of -40℃ ~+85℃ as well as complete protection functions to ensure safe and reliable operation. These features make the product suitable for applications with strict space constraints, such as industrial automation, power metering, and smart devices.
Features
- Assemble on the main PCB of the system
- 1.75''x0.86''compact size
- 85~305Vac input (277Vac available)
- No load power consumption <0.25W
- -40~85℃ wide operating temperature
- Protections: Short circuit / Overload / Over voltage
- Cooling by free air convection
- Safety Class Ⅱ
- 3 years warranty
Specifications
OUTPUT
- DC VOLTAGE
- 5V
- RATED CURRENT
- 2.8A
- CURRENT RANGE
- 0 ~ 2.8A
- RATED POWER
- 14W
- RIPPLE & NOISE (max.)Note.2
- 150mV
- INITIAL SET POINT ACCURACY
- ±3% for 3.3Vdc output, ±2% for other output
- LINE REGULATION
- ±0.5%
- LOAD REGULATION
- ±2% for 3.3Vdc output, ±1.5% for 5Vdc output, ±1% for other output
- CAPACITOR LOAD (Max.)
- 15000μF
INPUT
- VOLTAGE RANGE
- 85 ~ 305Vac 100 ~ 430Vdc
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 77%
- AC CURRENT (Typ.)
- 0.4A/115Vac 0.25A/230Vac
- INRUSH CURRENT (Typ.)
- 18A/115Vac 35A/230Vac
- NO LOAD POWER CONSUMPTION
- <0.25W
PROTECTION
- SHORT CIRCUIT
- Protection type : Continuous, automatic recovery, Hiccup mode
- OVERLOAD
- >110% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE (Max.)
- 9Vdc Protection type : Output voltage clamp
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.Note.4
- -40 ~ +85℃ (Refer to "Derating Curve")
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +105℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- ±0.15% / ℃ max. (0 ~ 85℃)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note.5)
- SAFETY STANDARDS
- LVD IEC62368-1 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVac leakage current <5mA
- ISOLATION RESISTANCE
- I/P-O/P:1000M Ohms / 500Vdc / 25℃/ 70% RH
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032(CISPR32) Class A without external components Radiated BS EN/EN55032(CISPR32) Class B with external components - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 3, ±6KV contact criteria B Radiated Susceptibility BS EN/EN61000-4-3 Level 3, 10m/V contact criteria A EFT/Bursts BS EN/EN61000-4-4 Level 2, ±2KV Surge BS EN/EN61000-4-5 Level 2, ±1KV Line-Line Conducted BS EN/EN61000-4-6 Level 2, 10Vrms Criteria A Voltage Dips and Interruptions BS EN/EN61000-4-11 0%, 70% perf. Criteria B
OTHERS
- MTBF (Typ.)
- >10000Khrs MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- A Type : 44.5*25*15mm (1.751*0.984*0.59 inch) ; B Type : 44.5*25.5*15mm (1.751*1.003*0.59 inch) C Type : 44.5*23*15.5mm (1.751*0.905*0.61 inch)
- PACKING
- A,B Type :11.2g ; 49pcs/per Tray, 637pcs/13 Tray/per carton C Type :11.2g ; 56pcs/per Tray, 448pcs/8 Tray/per carton
Test conditions and notes5
- 1.All parameters NOT specially mentioned are measured at 230Vac input, rated load and 25℃ of ambient temperature.
- 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μF & 47μF parallel capacitor.
- 3.Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
- 4.When starting at a low temperature of -40℃, the output capacitor needs to be equipped with a solid capacitor to meet the load reduction curve requirements.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
Technical drawings
Typical applications
- Industrial electrical equipment
- Mechanical equipment
- Factory automation equipment
- Hand-held electronic device
- Smart home
- Industrial control
Downloads
FAQ
What is the Mean Well IOB-15-05A used for?
The IOB-15-05A is an on-board AC-DC power module designed to provide a regulated 5V DC output in compact embedded equipment. It is intended for systems that need a small PCB-mounted power supply with 14W output capacity and low no-load power consumption.
What are the key electrical ratings of the IOB-15-05A?
This model is rated for 14W total output power and provides a single 5V DC output. Its rated output current is 2.8A, and it accepts a wide 85 to 305Vac input range or 100 to 430Vdc.
Is the IOB-15-05A suitable for wide input voltage applications?
Yes. The IOB-15-05A supports a wide universal input range of 85 to 305Vac, which makes it suitable for equipment used across different AC supply conditions. The product description also notes 277Vac availability.
Can the IOB-15-05A operate in demanding temperature environments?
This model is specified for operation from -40°C to +85°C, making it suitable for a broad range of industrial and enclosed equipment environments. Performance at higher temperatures should be considered with reference to the product's derating curve.
What protection features are included in the IOB-15-05A?
The IOB-15-05A includes short circuit, overload, and over voltage protection. Short circuit and overload protection use hiccup mode with automatic recovery after the fault condition is removed, while over voltage protection uses output voltage clamp protection.
How compact is the Mean Well IOB-15-05A?
The module measures 44.5 x 24 x 15 mm, making it a compact choice for space-constrained designs. Its product description also highlights the small footprint as approximately 1.75 by 0.86 inches.
Does the IOB-15-05A support energy-efficient standby operation?
Yes. The no-load power consumption is specified as less than 0.25W, which helps reduce standby power draw in equipment that remains powered for long periods. This can be useful in designs where efficiency and idle consumption matter.
What safety and compliance information is available for the IOB-15-05A?
The IOB-15-05A is described as Safety Class II and is approved to LVD IEC62368-1. It also specifies 3KVac input-to-output withstand voltage with leakage current below 5mA.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other IOB-15 Models
17 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.










