💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

1 5

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well DKE10C-24 DC-DC Converter - 10W - 36~72V in ±24V out 210mA

SKU DKE10C-24
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
Available to order
|

Overview

DKE10C-24 is the ±24V output model of this series: rated power 10W, typical efficiency 85%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • 3000VDC I/O isolation(option)
  • Built-in EMI filter
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty

Specifications

DKE10C-24Specifications from the official datasheet (2024-08-02 edition)

OUTPUT

DC VOLTAGE
±24V
CURRENT RANGE
±21 ~ ±210mA
RATED POWER
10W
RIPPLE & NOISE (max.)Note.2
80mVp-p
LINE REGULATIONNote.3
±0.3%
LOAD REGULATIONNote.4
±0.5%
VOLTAGE ACCURACY
±2.0%
SWITCHING FREQUENCY
250KHz min.

INPUT

VOLTAGE RANGE
36 ~ 72VDC
EFFICIENCY (Typ.)
85%
DC CURRENT Full load
270mA
DC CURRENT No load
8mA
FILTER
Pi network
PROTECTION
Fuse recommended

PROTECTION (Note. 5)

OVER CURRENT
160% ~ 250% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT
All output equipped with short circuit Protection type : Hiccup mode, recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.
-25 ~ +71℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY
-25 ~ +105℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03% / ℃ (0 ~ 50℃)
VIBRATION
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS
EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE
I/P-O/P:1.5KVDC
ISOLATION RESISTANCE
I/P-O/P: 100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55032 Class A, FCC part 15 Class A , EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level, criteria A , EAC TP TC 020

OTHERS

MTBF
500Khrs min. MIL-HDBK-217F(25℃)
DIMENSION
50.8*25.4*11.2mm or 2"*1"*0.44" inch (L*W*H)
PACKING
31.2g ; 10pcs/per tube, 400pcs/40 tube/per carton
Test conditions and notes5
  1. 1.All parameters are specified at normal input, rated load, 25℃ 70% RH ambient.
  2. 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
  3. 3.Line regulation is measured from low line to high line at rated load.
  4. 4.Load regulation is measured from 10% to 100% rated load.
  5. 5.Please prevent the converter from operating in overload or short circuit condition for more than 30 seconds.

Technical drawings

DKE10C-24 Mechanical Specification
Mechanical Specification
DKE10C-24 Packing
Packing

Downloads

FAQ

Can I use the DKE10C-24 for 24V automation or industrial control devices?

Yes, this version provides a regulated ±24V dual output when the source is 36-72VDC. Its 10W rating makes it more suitable for lower-power automation, monitoring, or control electronics than for larger 24V loads.

Is the DKE10C-24 appropriate for 24V sensors, relays, or interface circuits?

It can fit ±24V loads that remain within the 10W power rating. That makes it relevant for smaller 24V industrial electronics where compact size and a wide 36-72VDC input range matter.

Can this model power compact 24V embedded equipment inside a control enclosure?

Yes, if the equipment works from a regulated ±24V dual output and does not exceed 10W. The converter measures 50.8 × 25.4 × 11.2 mm and weighs 31.2 g, which helps where enclosure space is limited.

What are the output differences across the DKE10C family?

The family keeps the same base platform: 10W power, 36-72VDC input, regulated dual output, 50.8 × 25.4 × 11.2 mm size, 31.2 g weight, and -25°C to +71°C operation (refer to the derating curve). The output choices are ±5V at up to ±1000mA, ±12V at up to ±420mA, ±15V at up to ±333mA, and ±24V at up to ±210mA for the DKE10C-24.

Can the DKE10C-24 be used in harsh temperature conditions?

Its specified operating temperature range is -25°C to +71°C (refer to the derating curve), so it is rated across a fairly wide temperature band. No IP rating is listed, so the specs do not confirm outdoor, washdown, or exposed-environment use.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

{ "id":8441896370475, "variants" :[{ "context":"default", "variant_id": 45708347867435, "sku":"DKE10C-24", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well DKE10C-24 DC-DC Converter - 10W - 36~72V in ±24V out 210mA
Mean Well

Mean Well DKE10C-24 DC-DC Converter - 10W - 36~72V in ±24V out 210mA

Log in to see price

DKE10C-24 is the ±24V output model of this series: rated power 10W, typical efficiency 85%.

Features

  • 2:1 wide input range
  • 4:1 wide input range(option)
  • 1500VDC I/O isolation
  • 3000VDC I/O isolation(option)
  • Built-in EMI filter
  • Protections: Short circuit / Overload
  • Cooling by free air convection
  • Six-sided shield metal case
  • 100% burn-in test
  • Low cost / High reliability
  • Approvals: FCC / EAC / CE / UKCA
  • 2 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top