Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well NLDD-1200HW DC/DC LED Driver CC 1200mA - Step-down Wire Type

constant currentstep downhigh efficiency up to 97%IP67wire style

SKU NLDD-1200HW

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

NLDD-1200HW is the model of this series: typical efficiency 95% at full load and 36VDC/48VDC input.

NLDD-H series is a 60W DC/DC LED driver featuring constant current output. NLDD-H operates from 10~56VDC and offers models with different rated current ranging between 350mA and 1400mA. With the high efficiency up to 96%, The 94V-0 flame retardant plastic case the fully-potted silicone to enhance the heat dissipation allows this series to fit for classⅢ or DC bus lighting application.

Features

DC/DC step-down converter
Constant current output: 350mA to 1400mA
Wide input voltage: 10 ~ 56VDC(59VDC Max.)
Wide output LED forward voltage: 6 ~ 52VDC
High efficiency up to 96%
Comply with BS EN/EN61347 and BS EN/EN55015 regulation
For class Ⅲ application(SELV)
Built-in PWM and remote ON/OFF control
Protections: Short circuit / Over temperature
Cooling by free air convection
Fully encapsulated and compact site
Suitable for driving illumination LED
3 years warranty

Specifications

NLDD-1200HWSpecifications from the official datasheet (2024-10-16 edition)

OUTPUT

CURRENT RANGE: 1200mA
VOLTAGE RANGE^Note.4: 6 ~ 46VDC
CURRENT ACCURACY (Typ.): ±5% at 48VDC input
RIPPLE & NOISE(max.)^Note.2: 350mVp-p
SWITCHING FREQENCY: 200KHz

INPUT

VOLTAGE RANGE: 10 ~ 56VDC (59VDC Max.)
EFFICIENCY (max.): 95% at full load and 36VDC/48VDC input
DC CURRENT Full load^Note.3: 1200mA
DC CURRENT No load: 5mA

PWM DIMMING & ON/OFF CONTROL

REMOTE ON/OFF: Leave open if not use Power ON with dimming: DIM ~ -Vin >2.5 ~ 5VDC or open circuit Power OFF : DIM ~ -Vin < 0.8VDC or short
PWM FREQUENCY: 100 ~ 1KHz
QUIESCENT INPUT CURRENT IN SHUTDOWN MODE(max.): 2mA at PWM dimming OFF at 48VDC input

PROTECTION

SHORT CIRCUIT: Regulated at rated current Protection type: Can be continued, recovers automatically after fault condition is removed
OVER TEMPERATURE: Tj 165℃ typically(IC1) detect on main control IC Protection type : Shut down, recovers automatically after temperature goes down

ENVIRONMENT

WORKING TEMP.: -40 ~ + 50℃(Refer to derating curve)
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -40 ~ +85℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03% / ℃
VIBRATION: 10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
OPERATING CASE TEMP. (max.): 90℃
SOLDERING TEMPERATURE: Wave soldering: 265℃,5s (max.); Manual soldering: 390℃,3s (max.)

EMC

SAFETY STANDARDS: LVD BS EN/EN61347-1, BS EN/EN61347-2-13;IEC61347 and EAC TP TC 004 approved
EMC EMISSION: Compliance to BS EN/EN55015, BS EN/EN61547
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,6,8, light industry level, EAC TP TC 020

OTHERS

MTBF: 29984.3K hrs min. Telcordia SR-332 (Bellcore) 2881.6Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 32.1*20.5*12.5mm or 1.26"*0.8"*0.49" inch (L*W*H)
WEIGHT: NLDD-H:15.6g ; NLDD-HW:18g (Please refer to Page 6 for packing)
POTTING MATERIAL: Expoxy(UL94-V0)

Test conditions and notes7

1.All parameters are specified at normal input(48VDC), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf capacitor.
3.Test condition: 48VDC input.
4.Output voltage will always step down by 4 volts from input DC voltage.
5.The output of NLDD-H should not be connected to the input of the same unit or output from other sources.
6.The power supply is regarded as a part of the components in the system, and the final EMI test needs to be tested with the final device. If an additional EMI filter circuit is required to meet the electromagnetic compatibility requirements, please refer to the EMC test report for details. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
7.Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

Technical drawings

NLDD-1200HW Mechanical Specification — Mechanical Specification

NLDD-1200HW Derating Curve — Derating Curve

NLDD-1200HW PWM Dimming Control — PWM Dimming Control

NLDD-1200HW Efficiency VS Output Voltage — Efficiency VS Output Voltage

Typical applications

DC battery source lighting
Portable lighting
Commercial lighting
DC 48V Track lighting
DC 24V landscape lighting

Downloads

Certificates3

Mean Well NLDD-H-EMC Certificate PDF Download

Mean Well NLDD-CE-dec Certificate PDF Download

Mean Well NLDD-UK-dec Certificate PDF Download

Test reports1

Mean Well NLDD-1200H Test Report PDF Download

FAQ

Can the NLDD-1200HW power a constant-current LED downlight module?

Yes, if the downlight module is specified for constant current operation and its total forward voltage stays within 6-46V. This is a 60W step-down constant current driver, so it is not the right choice for constant-voltage LED products.

Is this driver suitable for LED signage modules in wet or dusty areas?

No, the NLDD-1200HW is not rated IP67; it is a fully potted component intended for integration into a final device. The driver has an operating temperature range of -40°C to +50°C, so it is suited to applications where ambient conditions are broader than typical indoor electronics, provided it is housed in an appropriate enclosure.

Can I use the NLDD-1200HW for a small LED array fed from a low-voltage source?

Yes, when the source is within the 10-56VDC input range and the LED array is a constant current load. The array also needs to stay within the 6-46V constant-current output range and within the 60W power rating.

How many LEDs can the NLDD-1200HW drive?

That depends on the forward voltage of each LED in the load, not on a fixed LED count. For compatibility, the full LED load must remain within the driver's 6-46V constant-current output range.

How does the NLDD-1200HW sit within the NLDD family?

This model is one of the 60W NLDD variants and shares the 6-46V constant-current range with the 1200H and 1400H. The 350H/350HW, 500H/500HW, 700H/700HW, and 1050H/1050HW versions use a wider 6-52V constant-current range with output currents of 350mA, 500mA, 700mA, and 1050mA respectively.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well NLDD-1050HW DC/DC LED Driver CC 1050mA - Step-down Wire Type	60W	52V	1.05A	IP20	View
Mean Well NLDD-700HW DC/DC LED Driver CC 700mA - Step-down Wire Type	60W	52V	0.7A	IP20	View
Mean Well NLDD-700H DC/DC LED Driver CC 700mA - Step-down	60W	52V	0.7A	IP20	View
Mean Well NLDD-500HW DC/DC LED Driver CC 500mA - Step-down Wire Type	60W	52V	0.5A	IP20	View
Mean Well NLDD-500H DC/DC LED Driver CC 500mA - Step-down	60W	52V	0.5A	IP20	View
Mean Well NLDD-350HW DC/DC LED Driver CC 350mA - Step-down Wire Type	60W	52V	0.35A	IP20	View
Mean Well NLDD-350H DC/DC LED Driver CC 350mA - Step-down	60W	52V	0.35A	IP20	View
Mean Well NLDD-1400HW DC/DC LED Driver CC 1400mA - Step-down Wire Type	60W	46V	1.4A	IP20	View
Mean Well NLDD-1400H DC/DC LED Driver CC 1400mA - Step-down	60W	46V	1.4A	IP20	View
Mean Well NLDD-1200H DC/DC LED Driver CC 1200mA - Step-down	60W	46V	1.2A	IP20	View
Mean Well NLDD-1050H DC/DC LED Driver CC 1050mA - Step-down	60W	52V	1.05A	IP20	View

Please log in to write a review.

{ "id":8420995137835, "variants" :[{ "context":"default", "variant_id": 45622339633451, "sku":"NLDD-1200HW", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }