Mean Well GST60A18-P1J Power Supply 60W 18V

Yes, if the equipment needs a constant 18V DC supply and its total load stays within 3.33A and 60W. That makes it a fit for 18V industrial control devices, panel electronics, or small operator interfaces that are designed for constant-voltage input.

It can be used for embedded or lab equipment that requires regulated 18V constant voltage, as long as the draw does not exceed 3.33A or 60W. The wide 90-264VAC input also helps when the bench or facility may be powered from different AC mains ranges.

It is suitable for 18V constant-voltage automation accessories when the combined demand remains at or below 3.33A and 60W. For low-to-medium power control loads, those limits are the key sizing check.

The listed specs show an operating temperature range of -30°C to +70°C, but they do not provide an IP rating. Because no ingress-protection level is stated, this model should be treated as a protected indoor power supply unless the final equipment enclosure provides the required environmental protection.

Your device should require constant 18V output, and its total current demand should be no more than 3.33A with total power no more than 60W. If those three values match, the GST60A18-P1J is in the correct operating range for the load.