Mean Well HEP-320-12A Power Supply | High-Efficiency | Best Price in NZ - Mean Well NZ

Overview

HEP-320-12A is the 12V output model of this series: rated current 22A, rated power 264W, typical efficiency 91%.

HEP-320 is a 320W industrial AC/DC power supply featuring the outstanding capability to operate under a harsh environment with high dust density, humidity, vibration and altitude. The entire series is housed with a robust aluminum case and fully potted with heat-conducted silicone. Thanks to state-of-the-art design, the working efficiency is up to 95%, enabling HEP-320, with a fanless design, perfectly work between -55℃ and +70℃ under free air convection.

Features

Universal AC input / Full range
Built-in active PFC function
High efficiency up to 95%
Fanless design, cooling by free air convection
-55~+70℃ wide operating range
Aluminum case and filling with heat-conducted silicone
IP65 design, optional IP68 rated model available
Meet 6KV surge immunity level
Withstand 10G vibration test
Operating altitude up to 5000 meters (Note.8)
Protections: Short circuit / Overload / Over voltage / Over temperature
6 years warranty

Specifications

HEP-320-12ASpecifications from the official datasheet (2025-10-10 edition)

OUTPUT

DC VOLTAGE: 12V
RATED CURRENT: 22A
RATED POWER: 264W
RIPPLE & NOISE (max.)^Note.2: 150mVp-p
VOLTAGE ADJ. RANGE^Note.5: 10.8 ~ 13.5V
CURRENT ADJ. RANGE^Note.5: 11 ~ 22A
VOLTAGE TOLERANCE^Note.3: ±3.0%
LINE REGULATION: ±0.5%
LOAD REGULATION: ±2.0%
SETUP, RISE TIME^Note.6: 2500ms,80ms/115VAC 600ms,80ms/230VAC at full load
HOLD UP TIME (Typ.): 15ms at full load 230VAC /115VAC

INPUT

VOLTAGE RANGE^Note.4: 90~264VAC (277VAC operational) 128~370VDC(390VDC operational)
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR (Typ.): PF>0.98/115VAC, PF>0.95/230VAC, PF>0.94/277VAC at full load
EFFICIENCY (Typ.): 91%
AC CURRENT (Typ.): 3.5A / 115VAC 1.65A / 230VAC 1.45A / 277VAC
INRUSH CURRENT(Typ.): COLD START 70A at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC

PROTECTION

OVER CURRENT: 105 ~ 125% Protection type : Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 14 ~ 17V Protection type : Shut down and latch off o/p voltage, re-power on to recover
OVER TEMPERATURE: Shut down and latch off o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.: -55 ~ +70℃ (Refer to "Derating Curve")
WORKING HUMIDITY: 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY: -60 ~ +80℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 60℃)
VIBRATION: 20 ~ 500Hz, 10G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS^Note.8: UL62368-1,IEC62368-1, IP65 (or IP68 for HEP-320 Blank-Type), EAC TP TC 004 approved ; Design refer to BS EN/EN62368-1
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY: Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55035, light industry level (surge 6KV), EAC TP TC 020

OTHERS

MTBF: 1565.6K hrs min. Telcordia SR-332 (Bellcore) ; 154.2Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 252*90*43.8mm (L*W*H)
PACKING: 1.88Kg; 8pcs/16Kg/0.92CUFT

Certifications & ratings

IP rating: IP65 IP68 (Optional)

Test conditions and notes9

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltages. Please check the static characteristics for more details.
5. A-type only.
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
7. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
8. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
9. The water protection level test for the IP68 rating is performed 1000mm below the surface of the water for 1 month.

Technical drawings

HEP-320-12A Block Diagram — Block Diagram

HEP-320-12A Derating Curve — Derating Curve

HEP-320-12A Mechanical Specification — Mechanical Specification

Typical applications

Outdoor telecommunication equipment
Outdoor electronic signage and billboard
Petroleum plant or mine shaft facility

Downloads

Certificates5

Mean Well HEP-EAC Certificate PDF Download

Mean Well HEP-320-CB(UL) Certificate PDF Download

Mean Well HEP-320-EMC Certificate PDF Download

Mean Well HEP-320-CE-dec Certificate PDF Download

Mean Well HEP-320-UK-dec Certificate PDF Download

Test reports1

Mean Well HEP-320-12 Test Report PDF Download

Catalogues1

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the HEP-320-12A for a 12V machine enclosure or factory control cabinet?

Yes, it is a 12V constant voltage unit rated for 264W and 22A, which fits higher-current 12V control and enclosure loads. That makes it suitable when several 12V devices need to share one supply without stepping up to a much larger model.

Is the HEP-320-12A a good fit for 12V embedded systems that need more current than entry-level supplies?

It offers up to 22A at 12V, which is materially higher than small 12V power supplies. The 264W rating gives it room for larger constant-voltage embedded systems that would exceed low-power models.

Can the HEP-320-12A be used for 12V security, access, or monitoring equipment in commercial settings?

It can be used where the overall load stays within 12V, 22A, and 264W. That makes it a reasonable choice for grouped 12V commercial electronics where one higher-capacity constant voltage source is preferred.

Would this model work for 12V automation equipment exposed to vibration?

Yes, the specifications include an IP65 rating, fanless construction, and 10G vibration resistance. Those characteristics are useful in industrial environments where moving equipment or mechanical vibration is a concern.

Is the HEP-320-12A suitable for outdoor use?

This version is rated IP65 water-resistant, so it is suitable for dust exposure and water spray but not the same as the IP68 version for more demanding wet conditions. Its operating range of -55°C to +70°C still supports very hot and very cold environments.

What are the main differences between the HEP-320-12A and other HEP-320 outputs?

In the HEP-320 family, the 12V version is 264W at 22A, the 15V version is 285W at 19A, the 24V version is 320.16W at 13.34A, the 36V version is 320.4W at 8.9A, the 48V version is 321.6W at 6.7A, and the 54V version is 321.3W at 5.95A. The non-A and A entries share the same electrical ratings in the sibling list, and this specific model is the IP65 water-resistant version.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current
Mean Well HEP-320-54A Power Supply 321.3W 54V 5.95A	321.3W	54V	5.95A	View
Mean Well HEP-320-54 Power Supply 321.3W 54V 5.95A	321.3W	54V	5.95A	View
Mean Well HEP-320-48A Power Supply 321.6W 48V 6.7A	321.6W	48V	6.7A	View
Mean Well HEP-320-48 Power Supply 321.6W 48V 6.7A	321.6W	48V	6.7A	View
Mean Well HEP-320-36A Power Supply 320.4W 36V 8.9A	320.4W	36V	8.9A	View
Mean Well HEP-320-36 Power Supply 320.4W 36V 8.9A	320.4W	36V	8.9A	View
Mean Well HEP-320-24A Power Supply 320.16W 24V 13.34A	320.16W	24V	13.34A	View
Mean Well HEP-320-24 Power Supply 320.16W 24V 13.34A	320.16W	24V	13.34A	View
Mean Well HEP-320-15A Power Supply 285W 15V 19A	285W	15V	19A	View
Mean Well HEP-320-15 Power Supply 285W 15V 19A	285W	15V	19A	View
Mean Well HEP-320-12 Power Supply 264W 12V 22A	264W	12V	22A	View

Please log in to write a review.

{ "id":8343863591211, "variants" :[{ "context":"default", "variant_id": 45320821637419, "sku":"HEP-320-12A", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }

Mean Well HEP-320-12A Power Supply 264W 12V 22A

Select model — 12 in this family

Overview

Features

Specifications

OUTPUT

INPUT

PROTECTION

ENVIRONMENT

SAFETY & EMC

OTHERS

Certifications & ratings

Technical drawings

Typical applications

Downloads

Certificates5

Test reports1

Catalogues1

FAQ

Payment & Security

Other HEP-320 Models

Write a review

Your cart

Mean Well HEP-320-12A Power Supply 264W 12V 22A

Features

Typical applications

Company Information

Services and Support

Choose options