Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SCW20W8-24 is the 24V output model of this series: rated power 20W, typical efficiency 88%.
SCW20W8 and DCW20W8 series are 20W isolated and regulated module type DC-DC converter with DIP24 package. It features international standard pins, a high efficiency up to 88%, wide working temperature range -40~+95℃, 3KVdc I/P-O/P isolation voltage, Compliance to BS EN/EN55032 radiated Class A without additional components, continuous-mode short circuit protection, 8:1(9~75V) ultra-wide input range, and various output voltage, 3.3V/5V/12V/15V/24V for single output and ±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.
Features
- DIP24 package with industry standard pinout
- 8:1(9~75Vdc) ultra-wide input range
- Operating temperature range -40 ~ +95℃
- No minimum load required
- Comply to BS EN/EN55032 radiated Class A without additional components
- High efficiency up to 88%
- Protections: Short circuit (Continuous) / Overload / Over voltage / UVLO
- Remote ON/OFF control
- 3KVdc I/O isolation
- 3 years warranty
Specifications
MODEL SELECTION TABLE
- INPUT VOLTAGE (RANGE)
- Nominal 12V, 24V,36V,48V,72V (9 ~ 75V)
- INPUT CURRENT NO LOAD
- 10mA
- INPUT CURRENT FULL LOAD
- 947mA
- OUTPUT VOLTAGE
- 24V
- OUTPUT CURRENT
- 833mA
- EFFICIENCY (TYP.)
- 88%
- CAPACITOR LOAD (MAX.)* For each output
- 220μF
INPUT
- VOLTAGE RANGE
- 9~75Vdc
- SURGE VOLTAGE (100ms max.)
- 100Vdc
- FILTER
- Pi type
- PROTECTION (Typ.)
- 6A Slow-Blow Type
OUTPUT
- VOLTAGE ACCURACY
- ±2%
- RATED POWER
- 20W
- RIPPLE & NOISENote.2
- 100mVp-p for 3.3~5V output ; 12~24V for 1% output Vp-p max.
- LINE REGULATIONNote.3
- ±0.5% for other output, ±1% for 3.3Vo output
- LOAD REGULATIONNote.4
- ±0.5%
- CROSS DEGUIATION
- ±5% @ 25%~100% Load only for dual output
- SWITCHING FREQUENCY (Typ.)
- 200KHz
PROTECTION
- SHORT CIRCUIT
- Protection type : Continuous, automatic recovery
- OVERLOAD
- 110 ~ 190% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed
- OVER VOLTAGE
- Protection type : Clamp by TVS diode
- UNDER VOLTAGE LOCKOUT (Typ.)
- Start-up voltage 8.8Vdc Shutdown voltage 8Vdc
FUNCTION
- REMOTE CONTROL
- Power ON: R.C. ~ -Vin >2.5~30Vdc or open circuit ; Power OFF: R.C. ~ -Vin <1Vdc or short
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.
- -40 ~ +95℃ (Refer to "Derating Curve")
- CASE TEMPERATURE
- +110℃ max.
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -40 ~ +125℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- ±0.05% / ℃ max. (0 ~ 95℃)
- SOLDERING TEMPERATURE
- 1.5mm from case of 3 ~ 5sec./260℃ max.
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC (Note.5)
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVdc
- ISOLATION RESISTANCE
- I/P-O/P:1000M Ohms / 500Vdc / 25℃/ 70% RH
- ISOLATION CAPACITANCE (Typ.)
- 1000pF
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032 N/A Radiated BS EN/EN55032 Class A without additional components Class B with additional components - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 2, ±4KV contact Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT/Bursts BS EN/EN61000-4-4 Level 2, 0.5KV Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.) Magnetic field immunity BS EN/EN61000-4-8 Level 1, 1A/m
OTHERS
- MTBF (Typ.)
- >570Khrs MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- 31.8*20.3*12.2mm (1.25*0.8*0.48 inch)
- CASE MATERIAL
- Five-side Metal shielded case
- PACKING
- 20g ; 15pcs/per tube, 750pcs/50 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input (24Vdc), rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 0% to 100% rated load.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
Technical drawings
Typical applications
- Telecom/datacom system
- Wireless network
- Industrial control facility
- Instrument
- Analyzer
- Detector
- Data switch
Downloads
FAQ
What is the input and output range of the Mean Well SCW20W8-24?
The SCW20W8-24 is a 20W DC-DC converter with an ultra-wide 9 to 75V DC input range. It provides a regulated 24V DC output, which makes it suitable for systems that operate across multiple nominal DC bus voltages.
What types of applications is the SCW20W8-24 designed for?
This model is designed for DC-powered industrial and embedded equipment that needs regulated 24V output from a wide DC input range. Its compact DIP package and wide input window make it relevant for OEM, control, and modular power applications.
How does the SCW20W8-24 differ from narrower input DC-DC converters?
A key difference is its 8:1 ultra-wide input range of 9 to 75V DC, which gives it more flexibility than converters built for a narrow nominal input range. That can help buyers standardize on one model across equipment using different DC source voltages.
Is the Mean Well SCW20W8-24 suitable for harsh temperature environments?
Yes. The SCW20W8-24 has an operating temperature range of -40°C to +95°C, subject to the derating curve (output load must be reduced at higher ambient temperatures). Buyers should still confirm the full application environment and enclosure conditions against their system requirements.
What protection and isolation features does the SCW20W8-24 include?
This model includes protection for short circuit, overload, over voltage, and UVLO. It also provides 3KV DC input-to-output isolation, which is an important specification for systems that need electrical separation between input and output sides.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SCWN0 Models
35 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




