Over 15 years experience of providing support of MEAN WELL Power Supplies
Overview
SPU01L-15 is the 15V output model of this series: rated power 1W, typical efficiency 79%.
SP U01 and DP U01 series are 1 W isolated and unregulated module type DC-DC converter with SIP 6 package. It features international standard pins, a high efficiency up to 84%, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated Class A without additional components, short circuit protection, etc. The models account for different input voltage 5V/12V/ 24V±10% , and various output voltage, 5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, s uch as industrial control, telecommunication field, distributed power architecture, and so on.
Features
- SIP6 package with industry standard pinout
- Operating temperature range -40 ~ +90℃
- Comply to BS EN/EN55032 radiated Class A without additional components
- High efficiency up to 84%
- Protection: Short circuit
- 1.5KVDC I/O isolation
- Low cost
- 3 years warranty
Specifications
INPUT
- INPUT VOLTAGE (RANGE)
- 5V (4.5 ~ 5.5V)
- INPUT CURRENT NO LOAD
- 45mA
- INPUT CURRENT FULL LOAD
- 258mA
- VOLTAGE RANGE
- 4.5 ~ 5.5Vdc ,
- SURGE VOLTAGE (100ms max.)
- 5Vin models : 9Vdc ; 12Vin models : 18Vdc ; 24Vin models : 30Vdc
- FILTER
- Internal capacitor
- PROTECTION
- Fuse recommended. 500mA Slow-Blow Type for all models
- INTERNAL POWER DISSIPATION
- 500mW
OUTPUT
- OUTPUT VOLTAGE
- 15V
- OUTPUT CURRENT
- 0 ~ 67mA
- EFFICIENCY (TYP.)
- 79%
- CAPACITOR LOAD (MAX.)* For each output
- 220μF
- VOLTAGE ACCURACY
- ±3.0%
- RATED POWER
- 1W
- RIPPLE & NOISENote.2
- 75mVp-p
- LINE REGULATIONNote.3
- 1.2% for 1% input variation
- LOAD REGULATIONNote.4
- 10%
- SWITCHING FREQUENCY (Typ.)
- 24Vin: 75KHz, other: 100KHz
PROTECTION
- SHORT CIRCUIT
- 1 second max.
ENVIRONMENT
- COOLING
- Free-air convection
- WORKING TEMP.
- -40 ~ +90℃ (Refer to "Derating Curve")
- CASE TEMPERATURE
- +100℃ max.
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -55 ~ +125℃, 10 ~ 95% RH non-condensing
- TEMP. COEFFICIENT
- 0.03% / ℃ (0 ~ 85℃)
- SOLDERING TEMPERATURE
- 1.5mm from case of 1 ~ 3sec./260℃ max.
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC ( Note.5)
- SAFETY STANDARDS
- EAC TP TC 020/2011 approved
- WITHSTAND VOLTAGE
- I/P-O/P:1.5KVDC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
- ISOLATION CAPACITANCE (Typ.)
- 10pF
- EMC EMISSION
-
Parameter Standard Test Level Conducted BS EN/EN55032(CISPR32) N/A Radiated BS EN/EN55032(CISPR32) Class A - EMC IMMUNITY
-
Parameter Standard Test Level ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.) Magnetic Field BS EN/EN61000-4-8 Level 2, 3A/m
OTHERS
- MTBF
- 1500Khrs MIL-HDBK-217F(25℃)
- DIMENSION (L*W*H)
- 5/12Vin models:19.5*6.1*10.2mm (0.77*0.24*0.40 inch); 24Vin models:19.5*7.2*10.2mm (0.77*0.28*0.40 inch)
- CASE MATERIAL
- Non-Conductive black plastic (UL 94V-0 rated)
- PACKING
- 5/12Vin models: 2.3g ; 16pcs/per tube,2944pcs/184 tube/per carton 24Vin models: 2.7g ; 15pcs/per tube,2205pcs/147 tube/per carton
Test conditions and notes5
- 1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
- 2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
- 3.Line regulation is measured from low line to high line at rated load.
- 4.Load regulation is measured from 20% to 100% rated load.
- 5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)
Technical drawings
Typical applications
- Telecom/ datacom system
- Wireless network
- Industrial control facility
- Instrument
- Analyzer
- Detector
- Data switch
Downloads
Certificates3
Test reports1
FAQ
Can I use the SPU01L-15 for low-power 15V instrumentation or control electronics?
This converter is appropriate for low-power instrumentation, automation, or embedded electronics that can work from an unregulated 15V output. The load must stay within the rated 1W output power and 67mA output current.
Is the SPU01L-15 suitable for a compact analog or monitoring circuit that needs 15V?
It can be used for small analog, monitoring, or interface circuits where 15V is needed as a low-power support rail. The specified input range is 4.5~5.5VDC and the output is an unregulated 15V.
Can this model fit embedded automation electronics with limited space?
Yes, for low-power 15V electronics that fit within the converter's 1W and 67mA limits. Its dimensions are 19.5 × 6.1 × 10.2 mm, which helps in compact embedded assemblies.
Is the SPU01L-15 designed for exposed outdoor use or only protected environments?
The working temperature range is -40°C to +90°C (refer to the derating curve), so it is specified for wide temperature conditions. No IP rating is provided, so the sheet does not identify it as an outdoor-exposed product.
How does the SPU01L-15 compare with the other output variants in the series?
Within the SPU01L family, the SPU01L-05 is rated 1W with 5V output and 200mA, the SPU01L-12 is rated 1W with 12V output and 84mA, and the SPU01L-15 is rated 1W with 15V output and 67mA. The family keeps the same 1W format while changing output voltage and rated output current.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other SPU01 Models
8 other models| Model | Power | Voltage | Current | IP Rating | |
|---|---|---|---|---|---|
| Mean Well SPU01N-15 DC-DC Converter - 1W - 21.6~26.4V in 15V out | 1W | 15V | 0.06A | — | View |
| Mean Well SPU01N-12 DC-DC Converter - 1W - 21.6~26.4V in 12V out | 1W | 12V | 0.08A | — | View |
| Mean Well SPU01N-05 DC-DC Converter - 1W - 21.6~26.4V in 5V out | 1W | 5V | 200 Milliampere | IP20 | View |
| Mean Well SPU01M-15 DC-DC Converter - 1W - 10.8~13.2V in 15V out | 1W | 15V | 0.067A | IP20 | View |
| Mean Well SPU01M-12 DC-DC Converter - 1W - 10.8~13.2V in 12V out | 1W | 12V | 0.084A | IP20 | View |
| Mean Well SPU01M-05 DC-DC Converter - 1W - 10.8~13.2V in 5V out | 1W | 5V | 200 Milliampere | IP20 | View |
| Mean Well SPU01L-12 DC-DC Converter - 1W - 4.4~5.5V in 12V out | 1W | 12V | 0.084A | IP20 | View |
| Mean Well SPU01L-05 DC-DC Converter - 1W - 4.4~5.5V in 5V out | 1W | 5V | 200 Milliampere | IP20 | View |
Please log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your review…
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.




