Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well XLN-60-12-DA2 LED Driver 60W 12V IP67, DALI2 + Push Dimming 5A

constant voltageclass II and PFCflicker-freeminimum dimming 0.1%

SKU XLN-60-12-DA2

Log in to see price Trade pricing & online ordering for account holders

In stock

Overview

XLN-60-12-DA2 is the 12V output model of this series: rated power 60W, typical efficiency 86%.

XLN-60 Series is a 60W with constant power and constant voltage output LED driver . It can operate from 100~305VAC and output current ranging between 900 mA to 1700 mA selectable by NFC setting. Thanks to high efficiency up to 90%, it is able to operate for -25℃~90℃ case temperature under free air convection. XLN-60 is designed based on latest safety regulation with 3 in 1 and DALI-2 dimming. XLN-60 can be adjusted for brightness with a push button as a simple way dimming, so it provides more flexibility for LED Lighting application.

Features

Constant power mode output with multiple stage selectable by NFC setting (H-type)
Constant voltage mode output available(12/24/48V)
Plastic housing with class Ⅱ and PFC design
Meet UL8750 Class 2 / Class P power unit
Flicker free, complying with CE ErP directive
Standby power consumption <0.5W
Meet emergency lighting (EL) application
Fully encapsulated with IP67
Minimum dimming level 0.1% (DALI-2 DT6)
Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-2 + Push dimming
5 years warranty

Specifications

XLN-60-12-DA2Specifications from the official datasheet (2026-02-04 edition)

OUTPUT

DC VOLTAGE: 12V
DEFAULT CURRENT: 5A
RATED POWER: 60W
SETUP,RISE TIME: 800ms,180ms/230VAC ,1000ms,180ms/115VAC

INPUT

VOLTAGE RANGE: 100~305VAC 155~400VDC
FREQUENCY RANGE: 47 ~ 63Hz
POWER FACTOR: PF≥0.95/115VAC, PF≥0.95/230VAC,PF≥0.9/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)
TOTAL HARMONIC DISTORTION: THD< 20%(@load ≥60%/230VAC; @load ≥75%/277VAC), THD<10%@load 100%/230VAC (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
EFFICIENCY(Typ.): 86%
AC CURRENT: 0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC
INRUSH CURRENT: COLD START 15A(twidth=310μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A CIRCUIT BREAKER: 25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT: <0.75mA / 277VAC
STANDBY POWER CONSUMPTION^Note5: Standby power consumption<0.5W(Dimming OFF, only for standard version B/DA2-type)

PROTECTION

OVERLOAD: 105~200% rated output power Protection type: Hiccup mode, recovers automatically after fault condition is removed.
SHORT CIRCUIT: Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE: 14-17V Shut down output voltage，re-power on to recover
OVER TEMPERATURE: Shut down output voltage，recovers automatically after fault condition is removed

ENVIRONMENT

WORKING TEMP.: Tcase=-25~90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.: Tcase=90℃
WORKING HUMIDITY: 20 ~ 90% RH non-condensing
STORAGE TEMP.,HUMIDITY: -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT: ±0.03%/℃ (0 ~ 50℃)
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY&EMC

SAFETY STANDARDS: UL8750(type "HL" and Class P),CSA C22.2 No. 250.13-12;ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC); BS EN/EN62384 independent, BIS IS15885(Part2/Sec13)(NOTE 13), GB/T19510.1, GB/T19510.213, EAC TP TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13
DALI STANDARDS: Comply with IEC62386-101, 102, 207
WITHSTAND VOLTAGE: I/P-O/P:3.75KVAC
ISOLATION RESISTANCE: I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55015(CISPR15) ,GB/T 17743
Radiated BS EN/EN55015(CISPR15) ,GB/T 17743
Harmonic Current BS EN/EN61000-3-2 , GB17625.1 Class C @load≥60%
Voltage Flicker BS EN/EN61000-3-3
EMC IMMUNITY: BS EN/EN61547

Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 3, 8KV air; Level 2, 4KV contact
Radiated BS EN/EN61000-4-3 Level 2
EFT/Burst BS EN/EN61000-4-4 Level 2
Surge BS EN/EN61000-4-5 Level 3, 1KV/Line-Line
Conducted BS EN/EN61000-4-6 Level 2
Magnetic Field BS EN/EN61000-4-8 Level 2
Voltage Dips and Interruptions BS EN/EN61000-4-11 70% residual voltage for 10 period, 0% residual voltage for 0.5 periods

Parameter	Standard	Test Level
Conducted	BS EN/EN55015(CISPR15) ,GB/T 17743
Radiated	BS EN/EN55015(CISPR15) ,GB/T 17743
Harmonic Current	BS EN/EN61000-3-2 , GB17625.1	Class C @load≥60%
Voltage Flicker	BS EN/EN61000-3-3

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 3, 8KV air; Level 2, 4KV contact
Radiated	BS EN/EN61000-4-3	Level 2
EFT/Burst	BS EN/EN61000-4-4	Level 2
Surge	BS EN/EN61000-4-5	Level 3, 1KV/Line-Line
Conducted	BS EN/EN61000-4-6	Level 2
Magnetic Field	BS EN/EN61000-4-8	Level 2
Voltage Dips and Interruptions	BS EN/EN61000-4-11	70% residual voltage for 10 period, 0% residual voltage for 0.5 periods

OTHERS

FLICKER^Note.9: PstLM ≤ 1, SVM ≤ 0.4
MTBF: 4053.7K hrs min. Telcordia SR-332 (Bellcore) 329.4Khrs min. MIL-HDBK-217F (25℃)
DIMENSION: 141.5*49*32mm(L*W*H)
PACKING: 0.49Kg ; 30pcs/15.7Kg/0.81CUFT

Certifications & ratings

IP: IP67
Class: 2

Test conditions and notes13

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
3. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
4. Current ripple is measured 50%~100% of maximum voltage under rated power delivery.
5. Standby power consumption is measured at 230VAC.
6. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
7. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
8. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
9. Flicker is measured at full load with the light source provided by MEAN WELL.
10. RCM is on a voluntary basis. Non IC classification Independent LED control gear is not suitable for residential installations.
11. This series meets the typical life expectancy of 50000 hours of operation when Tcase,particularly tc point(or TMP,per DLC), is about 75℃ or less.
12. For more information, please contact with MEAN WELL sales.
13. Products sourced from the China regions and some models sourced from India may not have the BIS logo,please refer to BIS certificate for details and contact your MEAN WELL sales for more information.

Technical drawings

XLN-60-12-DA2 BLOCK DIAGRAM — BLOCK DIAGRAM

XLN-60-12-DA2 DRIVING METHODS OF LED MODULE — DRIVING METHODS OF LED MODULE

XLN-60-12-DA2 NFC Function Description — NFC Function Description

XLN-60-12-DA2 DIMMING OPERATION — DIMMING OPERATION

XLN-60-12-DA2 OUTPUT LOAD vs TEMPERATURE — OUTPUT LOAD vs TEMPERATURE

XLN-60-12-DA2 TOTAL HARMONIC DISTORTION — TOTAL HARMONIC DISTORTION

XLN-60-12-DA2 POWER FACTOR (PF) CHARACTERISTIC — POWER FACTOR (PF) CHARACTERISTIC

XLN-60-12-DA2 EFFICIENCY vs LOAD — EFFICIENCY vs LOAD

XLN-60-12-DA2 MECHANICAL SPECIFICATION — MECHANICAL SPECIFICATION

Typical applications

Downloads

Datasheet1

XLN-60-12-DA2 datasheetXLN_60_spec_sheet.pdf · 2026-02-04 edition PDF Download

FAQ

What are the key output ratings of the Mean Well XLN-60-12-DA2?

The XLN-60-12-DA2 is a 60 W LED driver with a 12 V constant voltage output. Its rated output current is 5 A, making it suitable for compatible 12 V LED loads within the 60 W power rating.

Does the XLN-60-12-DA2 support DALI dimming?

Yes. This model supports DALI-2 DT6 dimming with a minimum dimming level of 0.1%. It also includes push dimming support according to the provided product data.

Is the XLN-60-12-DA2 suitable for wet or outdoor environments?

The XLN-60-12-DA2 is fully encapsulated and rated IP67. That rating indicates strong protection against dust and water ingress for demanding LED driver environments.

What operating temperature range is listed for the XLN-60-12-DA2?

The listed case temperature range for this model is -25 °C to 90 °C. Buyers should confirm that the intended application stays within the specified limits for the driver.

What types of lighting applications is this LED driver intended for?

The XLN-60-12-DA2 is intended for constant voltage LED driver applications requiring 12 V output and up to 60 W of power. Its DALI dimming, push dimming, IP67 rating, and flicker-free design make it relevant for commercial LED lighting projects where those features are required.

How is the XLN-60-12-DA2 different from a basic non-dimmable 12 V LED driver?

This model includes DALI dimming and push dimming rather than only fixed-output operation. It also lists features such as flicker-free operation, IP67 encapsulation, PFC design, and standby power below 0.5 W.

What warranty period is provided for the XLN-60-12-DA2?

The listed warranty period for the Mean Well XLN-60-12-DA2 is 5 years. This is part of the product information provided for this specific LED driver model.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well XLN-60-24-B LED Driver 60W 24V IP67, 3 in 1 Dimming	60W	24V	2.5A	IP67	View
Mean Well XLN-60-H LED Driver 60W 1400mA 9~54V Constant Power IP67, NFC Current Setting	60W	60V	1400 Milliampere	IP67	View
Mean Well XLN-60-24-DA2 LED Driver 60W 24V IP67, DALI2 + Push Dimming 2.5A	60W	24V	2.5A	IP67	View
Mean Well XLN-60-H-DA2 LED Driver 60W 1400mA 9~54V Constant Power IP67, DALI2 + Push Dimming, NFC Current Setting	60W	60V	1400 Milliampere	IP67	View
Mean Well XLN-60-H-B LED Driver 60W 1400mA 9~54V Constant Power IP67, 3 in 1 Dimming, NFC Current Setting	60W	60V	1400 Milliampere	IP67	View
Mean Well XLN-60-48-DA2 LED Driver 60W 48V IP67, DALI2 + Push Dimming 1.25A	60W	48V	1.25A	IP67	View
Mean Well XLN-60-48-B LED Driver 60W 48V IP67, 3 in 1 Dimming	60W	48V	1.25A	IP67	View
Mean Well XLN-60-48 LED Driver 60W 48V IP67 1.25A	60W	48V	1.25A	IP67	View
Mean Well XLN-60-24 LED Driver 60W 24V IP67 2.5A	60W	24V	2.5A	IP67	View
Mean Well XLN-60-12-B LED Driver 60W 12V IP67, 3 in 1 Dimming	60W	12V	5A	IP67	View
Mean Well XLN-60-12 LED Driver 60W 12V IP67 5A	60W	12V	5A	IP67	View

Please log in to write a review.

{ "id":9047386423595, "variants" :[{ "context":"default", "variant_id": 47991149166891, "sku":"XLN-60-12-DA2", "inventory_qty" : 5, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }