Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well SPAN02E-15 DC-DC Converter - 2W - 4.5~9V in 15V out 134mA

SKU SPAN02E-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

SPAN02E-15 is the 15V output model of this series: rated power 2W, typical efficiency 80%.

SPAN02 and DPAN02 series are 2W isolated and regulated module type DC-DC converter with SIP 8 package. It features international standard pins, a high efficiency up to 85%, wide working temperature range -40~+90℃, 1.5KVDC I/P-O/P isolation voltage, compliance to BS EN/EN55032 radiated class A without additional components, overload and continuous-mode short circuit protection, etc. The models account for different input voltage 4.5~9V, 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V/±12V/±15V for dual outputs, which are suitable for all kinds of systems, such as industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP8 package with industry standard pinout
2:1 wide input range
Operating temperature range -40 ~ +90℃
No minimum load required
Comply to BS EN/EN55032 radiated Class A without additional components
High efficiency up to 85%
Protections: Short circuit (Continuous) / Overload
1.5KVDC I/O isolation
Remote ON/OFF control
3 years warranty

Specifications

SPAN02E-15Specifications from the official datasheet (2024-04-30 edition)

INPUT

INPUT VOLTAGE (RANGE): 5V (4.5 ~ 9V)
INPUT CURRENT NO LOAD: 65mA
INPUT CURRENT FULL LOAD: 503mA
VOLTAGE RANGE: 4.5~9Vdc ,
SURGE VOLTAGE (100ms max.): 5Vin models : 15Vdc ; 12Vin models : 25Vdc ; 24Vin models : 50Vdc ; 48Vin models : 100Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 5Vin models: 1000mA Slow-Blow Type, 12Vin models: 500mA Slow-Blow Type, 24V and 48Vin models: 250mA Slow-Blow Type
INTERNAL POWER DISSIPATION: 500mW

OUTPUT

OUTPUT VOLTAGE: 15V
OUTPUT CURRENT: 0 ~ 134mA
EFFICIENCY (TYP.): 80%
CAPACITOR LOAD (MAX.)^{* For each output}: 134μF
VOLTAGE ACCURACY: ±1.5%
RATED POWER: 2W
RIPPLE & NOISE^Note.2: 75mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: Single output models:±0.5%, Dual output models:±1%
SWITCHING FREQUENCY (Typ.): 100KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: Protection type : Recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT Start-up voltage: 5Vin : 4.2Vdc ; 12Vin : 7.3Vdc ; 24Vin : 15.5Vdc ; 48Vin : 31Vdc
UNDER VOLTAGE LOCKOUT Shutdown voltage: 5Vin : 3Vdc ; 12Vin : 5.8Vdc ; 24Vin : 12Vdc ; 48Vin : 24Vdc

FUNCTION

REMOTE CONTROL: Power ON: R.C. ~ -Vin <0.8Vdc or open circuit; Power OFF: R.C. ~ -Vin >4 ~ 15Vdc

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +100℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.03% / ℃ (0 ~ 85℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.5)

SAFETY STANDARDS: EAC TP TC 020/2011 (EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P:1.5KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 10pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032(CISPR32) N/A
Radiated BS EN/EN55032(CISPR32) Class A
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line-Line
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 2, 3A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032(CISPR32)	N/A
Radiated	BS EN/EN55032(CISPR32)	Class A

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±8KV air, ±4KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line-Line
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 2, 3A/m

OTHERS

MTBF: 2500Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 21.8*9.2*11.1mm (0.86*0.36*0.44 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.7g ; 14pcs/per tube, 2058pcs/147 tube/per carton

Test conditions and notes5

1.All parameters are specified at normal input(E:5Vdc, A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

SPAN02E-15 Plug Assignment — Plug Assignment

Typical applications

Downloads

Certificates2

Certificate (SPAN02-DPAN02-CE-sec)(EN) PDF Download

Certificate (SPAN-DPAN02-UK-dec)(EN) PDF Download

Test reports1

Test Report (SPAN02E-15)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the SPAN02E-15 for a low-power 15V control circuit in automation equipment?

It can fit low-power 15V electronics because it provides a constant 15V output with a 2W rating. That makes it more appropriate for compact control and interface sections than for larger 15V loads.

Is the SPAN02E-15 suitable for embedded 15V signal or monitoring electronics?

Yes, it is aligned with low-power 15V embedded applications that need constant voltage. The 2W output level keeps it in the range for small electronics rather than higher-demand devices.

Can this model be used in compact industrial or communications hardware that needs 15V?

It can be a fit where a small 15V constant-voltage rail is needed and the load remains within 2W. Its 21.8 × 11.1 × 9.2 mm body also helps in space-constrained hardware.

Is the SPAN02E-15 a good choice for very small embedded assemblies?

The unit measures 21.8 × 9.2 × 11.1 mm and weighs 2.7g, so it is well suited to compact layouts. That size is consistent with low-power embedded integration.

Can the SPAN02E-15 be used in outdoor or extreme-temperature environments?

The specified operating temperature range is -40°C to +90°C, so the temperature capability is broad. No IP rating is listed in the provided specs, so it should be considered for protected environments rather than exposed outdoor use.

What are the output differences across the SPAN02E series?

The SPAN02E family shares 2W power, constant-voltage operation, 21.8 × 9.2 × 11.1 mm dimensions, 2.7g weight, and a -40°C to +90°C operating range. The available outputs are 3.3V at 500mA, 5V at 400mA, 12V at 167mA, and 15V at 134mA for the SPAN02E-15.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well SPAN02E-12 DC-DC Converter - 2W - 4.5~9V in 12V out 167mA	2W	12V	167 Milliampere	IP20	View
Mean Well SPAN02E-05 DC-DC Converter - 2W - 4.5~9V in 5V out 400mA	2W	5V	400 Milliampere	IP20	View
Mean Well SPAN02E-03 DC-DC Converter - 2W - 4.5~9V in 3.3V out 500mA	2W	3.3V	500 Milliampere	IP20	View
Mean Well SPAN02C-15 DC-DC Converter - 2W - 36~75V in 15V out 134mA	2W	15V	134 Milliampere	IP20	View
Mean Well SPAN02C-12 DC-DC Converter - 2W - 36~75V in 12V out 167mA	2W	12V	167 Milliampere	IP20	View
Mean Well SPAN02C-05 DC-DC Converter - 2W - 36~75V in 5V out 400mA	2W	5V	400 Milliampere	IP20	View
Mean Well SPAN02C-03 DC-DC Converter - 2W - 36~75V in 3.3V out 500mA	2W	3.3V	500 Milliampere	IP20	View
Mean Well SPAN02B-15 DC-DC Converter - 2W - 18~36V in 15V out 134mA	2W	15V	134 Milliampere	IP20	View
Mean Well SPAN02B-12 DC-DC Converter - 2W - 18~36V in 12V out 167mA	2W	12V	167 Milliampere	IP20	View
Mean Well SPAN02B-05 DC-DC Converter - 2W - 18~36V in 5V out 400mA	2W	5V	400 Milliampere	IP20	View
Mean Well SPAN02B-03 DC-DC Converter - 2W - 18~36V in 3.3V out 500mA	2W	3.3V	500 Milliampere	IP20	View
Mean Well SPAN02A-15 DC-DC Converter - 2W - 9~18V in 15V out 134mA	2W	15V	134 Milliampere	IP20	View
Mean Well SPAN02A-12 DC-DC Converter - 2W - 9~18V in 12V out 167mA	2W	12V	167 Milliampere	IP20	View
Mean Well SPAN02A-05 DC-DC Converter - 2W - 9~18V in 5V out 400mA	2W	5V	400 Milliampere	IP20	View
Mean Well SPAN02A-03 DC-DC Converter - 2W - 9~18V in 3.3V out 500mA	2W	3.3V	500 Milliampere	IP20	View

Please log in to write a review.

{ "id":8442819641643, "variants" :[{ "context":"default", "variant_id": 45712925557035, "sku":"SPAN02E-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }