Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDS02N-12N SIP Package DC-DC Converter- 2W - 12V Out 167mA

Input 21.6~26.4VSIP7 package with international standard pinoutmedical gradelow cost

SKU MDS02N-12N

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDS02N-12N is the 12V output model of this series: rated power 2W, typical efficiency 84%.

MDS02-N and MDD02-N series are 2W isolated and unregulated module type medical grade DC-DC converter with SIP7 package. It features international standard pins, a high efficiency up to 86%, wide working temperature range -40~+95℃, 6KVDC I/P-O/P high isolation voltage, short circuit protection, etc. The models account for different input voltage 5V/12V/24V±10%, and various output voltage, 3.3V/5V/12V/15V for single output and ±5V /±12V/±15V for dual outputs, which are suitable for medical systems, ultra low leakage current or industrial control, telecommunication field, distributed power architecture, and so on.

Features

SIP7 package with international standard pinout
Operating temperature range -40 ~ +95℃
Comply with IEC/UL62368-1 and LVD IEC60601-1
Medical safety approved (1xMOPP/2xMOOP) according to IEC60601-1
Low patient leakage current <2μA
Protections: Short circuit (Continuous)
6KVDC hight I/O isolation (Reinforced insulation)
Low cost
3 years warranty

Specifications

MDS02N-12NSpecifications from the official datasheet (2024-08-12 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): Normal 24V (21.6 ~ 26.4V)
INPUT CURRENT NO LOAD: 12mA
INPUT CURRENT FULL LOAD: 100mA
OUTPUT VOLTAGE: 12V
OUTPUT CURRENT: 17 ~ 167mA
EFFICIENCY (TYP.): 84%
CAPACITOR LOAD (MAX.)^{* For each output}: 330μF

INPUT

VOLTAGE RANGE: 21.6 ~ 26.4Vdc
FILTER: Internal capacitor
PROTECTION: Fuse recommended. 500mA Slow-Blow Type for all models

OUTPUT

VOLTAGE ACCURACY: ±5.0%
RATED POWER: 2W
RIPPLE & NOISE^Note.2: 100mVp-p
LINE REGULATION^Note.3: 1.2% for 1% input variation
LOAD REGULATION^Note.4: ±15% for 3.3Vo, 5Vo ; ±10% for others
SWITCHING FREQUENCY (Typ.): 20KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +95℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +105℃
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.02% / ℃ (0 ~ 90℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.6)

SAFETY STANDARDS: IEC62368-1 / UL62368-1, LVD IEC60601-1, EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE: I/P-O/P:6KVDC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION LEVEL: Primary-secondary: 1xMOPP / 2xMOOP when system input voltage is with 250VAC
ISOLATION CAPACITANCE (Typ.): 25pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55032, BS EN/EN55011 Class A/B with external components
Radiated BS EN/EN55032, BS EN/EN55011 Class A/B with external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility BS EN/EN61000-4-3 Level 2, 3V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, 0.5KV / 5KHz
Surge BS EN/EN61000-4-5 Level 1, 0.5KV Line to Ground
Conducted BS EN/EN61000-4-6 Level 2, 3V(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 1, 1A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55032, BS EN/EN55011	Class A/B with external components
Radiated	BS EN/EN55032, BS EN/EN55011	Class A/B with external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 2, ±4KV contact, Level 3, ±8KV air
Radiated Susceptibility	BS EN/EN61000-4-3	Level 2, 3V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, 0.5KV / 5KHz
Surge	BS EN/EN61000-4-5	Level 1, 0.5KV Line to Ground
Conducted	BS EN/EN61000-4-6	Level 2, 3V(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 1, 1A/m

OTHERS

MTBF: 12900Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 19.7*7.1*11.5mm (0.775*0.279*0.452 inch)
CASE MATERIAL: Non-Conductive black plastic (UL 94V-0 rated)
PACKING: 2.8g ; 24pcs/per tube, 2160pcs/90 tube/per carton

Test conditions and notes6

1.All parameters are specified at normal input(L:5Vdc, M:12Vdc, N:24Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 10% to 100% rated load.
5.Patient leakage current(2μA max.) and reinforced isolation is based on a 250VAC, 50/60Hz system input voltage.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDS02N-12N Mechanical Specification — Mechanical Specification

MDS02N-12N EMC Suggestion — EMC Suggestion

Typical applications

Downloads

::specification::

FAQ

What is the Mean Well MDS02N-12N used for?

The MDS02N-12N is a 2W SIP-package, medical grade unregulated DC-DC converter intended for compact embedded power applications that need a 12V output. Its reinforced 6KVDC input-to-output isolation and medical safety approval make it relevant for industrial and medical-related equipment where isolation and safety matter.

What are the key electrical specifications of the MDS02N-12N?

This model is rated for 2W output power and provides a 12V DC output with an output current range of 17 to 167mA. It is the 24V nominal input version and operates over a 21.6 to 26.4V DC input range.

Is the MDS02N-12N suitable for medical or safety-sensitive equipment?

Yes, this series is medical safety approved to IEC60601-1 with 1xMOPP and 2xMOOP. It also lists a patient leakage current of 2μA max and approval to IEC62368-1/UL62368-1 and LVD IEC60601-1, which supports use in applications with stricter safety requirements.

How does the MDS02N-12N perform in harsh temperature conditions?

The MDS02N-12N has an operating temperature range of -40°C to +95°C, with load derating at higher temperatures per the derating curve. That wide range makes it a practical option for equipment exposed to cold starts, elevated internal enclosure temperatures, or other demanding operating environments.

What protection features does the MDS02N-12N include?

This converter includes continuous short-circuit protection with automatic recovery. Mean Well also recommends an external 500mA slow-blow fuse on the input.

Why would a buyer choose the MDS02N-12N over a non-isolated compact converter?

A main differentiator is its 6KVDC input-to-output isolation with reinforced insulation in a compact SIP package. Buyers comparing isolated versus non-isolated options may choose this model when safety approvals, isolation performance, and small size are more important than using a basic low-cost converter.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDS02N-15N SIP Package DC-DC Converter- 2W - 15V Out 133mA	2W	15V	0 Milliampere	IP20	View
Mean Well MDS02N-05N SIP Package DC-DC Converter- 2W - 5V out 400mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDS02N-03N SIP Package DC-DC Converter- 2W - 3.3V out 606mA	2W	3.3V	0 Milliampere	IP20	View
Mean Well MDS02M-15N SIP Package DC-DC Converter- 2W - 15V Out 133mA	2W	15V	0.1333A	IP20	View
Mean Well MDS02M-12N SIP Package DC-DC Converter- 2W - 12V Out 167mA	2W	12V	0.1667A	IP20	View
Mean Well MDS02M-05N SIP Package DC-DC Converter- 2W - 5V out 400mA	2W	5V	0 Milliampere	IP20	View
Mean Well MDS02M-03N SIP Package DC-DC Converter- 2W - 3.3V out 606mA	2W	3.3V	0 Milliampere	IP20	View
Mean Well MDS02L-15N SIP Package DC-DC Converter- 2W - 15V Out 133mA	2W	15V	0.1333A	IP20	View
Mean Well MDS02L-12N SIP Package DC-DC Converter- 2W - 12V Out 167mA	2W	12V	0.1667A	IP20	View
Mean Well MDS02L-05N SIP Package DC-DC Converter- 2W - 5V out 400mA	2W	5V	0.4A	IP20	View
Mean Well MDS02L-03N SIP Package DC-DC Converter- 2W - 3.3V out 606mA	2W	3.3V	0 Milliampere	IP20	View

Please log in to write a review.

{ "id":9596818719019, "variants" :[{ "context":"default", "variant_id": 49368192483627, "sku":"MDS02N-12N", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }