Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well MDS15A-15 DC-DC Converter - 15W - 9~18V in 15V out 1A

SKU MDS15A-15

Log in to see price Trade pricing & online ordering for account holders

Available to order

Overview

MDS15A-15 is the 15V output model of this series: rated power 15W, typical efficiency 87%.

MDS15 series is 15W isolated and regulated module type medical grade DC-DC converter with 2"x1" package. It features international standard pins, a high efficiency up to 88%, wide working temperature range -40~+90℃, 4KVAC I/P-O/P high isolation voltage, compliance with IEC60601-1 medical standard, continuous-mode short circuit protection, etc. The models account for different input voltage 9~18V, 18~36V and 36~75V 2:1 wide input range, and various output voltage 5V/12V/15V/24V, which are suitable for medical systems, ultra low leakage current.

Features

DIP 2"x1" package with international standard pinout
2:1 wide input range
Low patient leakage current <5μA
Wide operating temperature range -40 ~ +90℃
Medical safety approved (2xMOPP) according to IEC60601-1
No minimum load required
Protections: Short circuit (Continuous) / Overload / Input under voltage
4000VAC high I/O isolation (Reinforced isolation)
3 years warranty

Specifications

MDS15A-15Specifications from the official datasheet (2024-04-30 edition)

MODEL SELECTION TABLE

INPUT VOLTAGE (RANGE): Normal 12V (9 ~ 18V)
INPUT CURRENT NO LOAD: 10mA
INPUT CURRENT FULL LOAD: 1450mA
OUTPUT VOLTAGE: 15V
OUTPUT CURRENT: 1000mA
EFFICIENCY (Typ.): 87%
CAPACITOR LOAD (MAX.): 720μF

INPUT

VOLTAGE RANGE: 9~18Vdc
SURGE VOLTAGE (100ms max.): 12Vin models : 25Vdc, 24Vin models : 50Vdc, 48Vin models : 100Vdc
FILTER: Pi type
PROTECTION: Fuse recommended. 12Vin models: 4A delay time Type, 24Vin models: 2A delay time Type, 48Vin models: 1A delay time Type

OUTPUT

VOLTAGE ACCURACY: ±1%
RATED POWER: 15W
RIPPLE & NOISE^Note.2: 60mVp-p
LINE REGULATION^Note.3: ±0.5%
LOAD REGULATION^Note.4: ±0.5%
SWITCHING FREQUENCY (Typ.): 12Vin/24Vin:250KHz, 48Vin:300KHz

PROTECTION

SHORT CIRCUIT: Protection type : Continuous, automatic recovery
OVERLOAD: 110 ~ 185% rated output power Protection type : Recovers automatically after fault condition is removed
UNDER VOLTAGE LOCKOUT: 12Vin: 7.5Vdc, 24Vin: 15Vdc, 48Vin: 33Vdc

ENVIRONMENT

COOLING: Free-air convection
WORKING TEMP.: -40 ~ +90℃ (Refer to "Derating Curve")
CASE TEMPERATURE: +110℃ max.
WORKING HUMIDITY: 20% ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY: -55 ~ +125℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT: 0.03% / ℃ (0 ~ 70℃)
SOLDERING TEMPERATURE: 1.5mm from case of 1 ~ 3sec./260℃ max.
VIBRATION: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC ( Note.6)

SAFETY STANDARDS: IEC60601-1(LVD) 3rd edition, EAC TP TC 020/2011(EAC TP TC 004 for 48Vin type only) approved
WITHSTAND VOLTAGE: I/P-O/P 4KVAC
ISOLATION RESISTANCE: I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
ISOLATION CAPACITANCE (Typ.): 100pF
EMC EMISSION: Parameter Standard Test Level

Conducted BS EN/EN55011 Class A without external components
Radiated BS EN/EN55011 Class A without external components
EMC IMMUNITY: Parameter Standard Test Level

ESD BS EN/EN61000-4-2 Level 1, ±15KV air, ±8KV contact
Radiated Susceptibility BS EN/EN61000-4-3 Level 1, 10V/m
EFT/Bursts BS EN/EN61000-4-4 Level 1, ±2KV
Surge BS EN/EN61000-4-5 Level 1, ±1KV Line-Line, ±2KV Line-GND
Conducted BS EN/EN61000-4-6 Level 1, 10Vrms(e.m.f.)
Magnetic Field BS EN/EN61000-4-8 Level 2, 10A/m

Parameter	Standard	Test Level
Conducted	BS EN/EN55011	Class A without external components
Radiated	BS EN/EN55011	Class A without external components

Parameter	Standard	Test Level
ESD	BS EN/EN61000-4-2	Level 1, ±15KV air, ±8KV contact
Radiated Susceptibility	BS EN/EN61000-4-3	Level 1, 10V/m
EFT/Bursts	BS EN/EN61000-4-4	Level 1, ±2KV
Surge	BS EN/EN61000-4-5	Level 1, ±1KV Line-Line, ±2KV Line-GND
Conducted	BS EN/EN61000-4-6	Level 1, 10Vrms(e.m.f.)
Magnetic Field	BS EN/EN61000-4-8	Level 2, 10A/m

OTHERS

MTBF: 1060Khrs MIL-HDBK-217F(25℃)
DIMENSION (L*W*H): 50.8*25.4*12mm (2*1*0.47 inch)
CASE MATERIAL: UL94V-0 plastic case
PACKING: 30g; 18pcs/per tube, 432pcs/24 tube max./carton

Test conditions and notes6

1.All parameters are specified at normal input(A:12Vdc, B:24Vdc, C:48Vdc), rated load, 25℃ 70% RH ambient.
2.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1μf & 47μf capacitor.
3.Line regulation is measured from low line to high line at rated load.
4.Load regulation is measured from 0% to 100% rated load.
5.2xMOPP base on a working voltage of 250Vac between Primary to Secondary.
6.The final equipment must be re-confirm that it still meet EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”(as available on http://www.meanwell.com)

Technical drawings

MDS15A-15 Pin Configuration — Pin Configuration

MDS15A-15 Derating Curve — Derating Curve

Typical applications

Medical devices
Medical oxygen monitor
CT scanning
Medical carts
Oral care equipment

Downloads

Certificates3

Certificate (MDS15-20-EMC)(EN) PDF Download

Certificate (MDS15-20-CE-dec)(EN) PDF Download

Certificate (MDS15-20-UK-dec)(EN) PDF Download

Catalogues2

Mean Well DC-DC Catalog PDF Download

Mean Well Catalog (Industrial) PDF Download

FAQ

Can I use the MDS15A-15 for 15V industrial instrumentation or analog control circuits?

Yes, it is designed as a constant-voltage 15V output unit rated for 15W and 1A. That makes it suitable for low-power 15V industrial or control electronics when the input source is within 9-18Vdc.

Is the MDS15A-15 a fit for embedded systems that need a regulated 15V rail?

It can be used where the load specifically requires 15V constant-voltage output and stays within 1A. The input side also needs to match the listed 9-18Vdc range.

Can this model support low-power 15V automation modules inside equipment enclosures?

For compact automation modules, the main fit points are its 15V output, 15W rating, and 1A rated output current. It is best matched to low-power electronics rather than loads that need more than 15W.

Will the MDS15A-15 handle cold or high-heat operating environments?

The specified operating range is -40C to +90C (load derating applies at higher ambient temperatures per the derating curve), so the temperature rating is wide for industrial environments. The specs do not include an IP rating, so temperature capability is stated, but ingress protection is not.

What are the differences between the MDS15A-15 and the other MDS15A versions?

The MDS15A family shares a 15W rating and 9-18Vdc input range. Output options are 5V at 3A on MDS15A-05, 12V at 1.25A on MDS15A-12, 15V at 1A on MDS15A-15, and 24V at 625mA on MDS15A-24.

Payment & Security

Payment methods

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Model	Power	Voltage	Current	IP Rating
Mean Well MDS15C-24 DC-DC Converter - 15W - 36~75V in 24V out 625mA	15W	24V	625 Milliampere	IP20	View
Mean Well MDS15C-15 DC-DC Converter - 15W - 36~75V in 15V out 1A	15W	15V	1A	IP20	View
Mean Well MDS15C-12 DC-DC Converter - 15W - 36~75V in 12V out 1.25A	15W	12V	1.25A	IP20	View
Mean Well MDS15C-05 DC-DC Converter - 15W - 36~75V in 5V out 3A	15W	5V	3A	IP20	View
Mean Well MDS15B-24 DC-DC Converter - 15W - 18~36V in 24V out 625mA	15W	24V	625 Milliampere	IP20	View
Mean Well MDS15B-15 DC-DC Converter - 15W - 18~36V in 15V out 1A	15W	15V	1A	IP20	View
Mean Well MDS15B-12 DC-DC Converter - 15W - 18~36V in 12V out 1.25A	15W	12V	1.25A	IP20	View
Mean Well MDS15B-05 DC-DC Converter - 15W - 18~36V in 5V out 3A	15W	5V	3A	IP20	View
Mean Well MDS15A-24 DC-DC Converter - 15W - 9~18V in 24V out 625mA	15W	24V	625 Milliampere	IP20	View
Mean Well MDS15A-12 DC-DC Converter - 15W - 9~18V in 12V out 1.25A	15W	12V	1.25A	IP20	View
Mean Well MDS15A-05 DC-DC Converter - 15W - 9~18V in 5V out 3A	15W	5V	3A	IP20	View

Please log in to write a review.

{ "id":8442611761451, "variants" :[{ "context":"default", "variant_id": 45711618081067, "sku":"MDS15A-15", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }