💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

☎ 0800 88 87 86  |  +64 22 522 4414

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Mean Well

Mean Well HLN-80H-48A Power Supply 80W 48V - IP64, Adjustable 1.7A

fully isolated plastic caseIP64suitable for signage applicationsClass 2 power unit
SKU HLN-80H-48A
Log in to see price Trade pricing & online ordering for account holders
Log in or apply for a trade account →
End of Life, Succeeded by LPF-90-48
Available to order
|

Overview

HLN-80H-48A is the 48V output model of this series: rated current 1.7A, rated power 81.6W, typical efficiency 91%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • OCP point adjustable through output cable or internal potentiometer
  • Fully isolated plastic case with IP64 level
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for LED lighting, Industrial Lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • Suitable for dry / damp locations or outdoor application
  • 3 years warranty

Specifications

HLN-80H-48ASpecifications from the official datasheet (2026-02-09 edition)

OUTPUT

DC VOLTAGE
48V
CONSTANT CURRENT REGIONNote.4
28.8 ~ 48V
RATED CURRENT
1.7A
RATED POWER
81.6W
RIPPLE & NOISE (max.)Note.2
200mVp-p
VOLTAGE ADJ. RANGENote.6
43 ~ 53V
CURRENT ADJ. RANGE
Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
1.02 ~ 1.7A
VOLTAGE TOLERANCENote.3
±1.0%
LINE REGULATION
±0.5%
LOAD REGULATION
±0.5%
SETUP, RISE TIMENote.8
1200ms,80ms/115VAC 500ms,80ms/230VAC at full load ; B type 1200ms,200ms/115VAC 500ms,200ms/230VAC at 95% load
HOLD UP TIME (Typ.)
16ms at full load 230VAC /115VAC

INPUT

VOLTAGE RANGENote.5
90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.96/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
TOTAL HARMONIC DISTORTION
THD< 20% when output loading≧60% at 115VAC/230VAC input and output loading≧75% at 277VAC input
EFFICIENCY (Typ.)
91%
AC CURRENT (Typ.)
0.85A / 115VAC 0.425A / 230VAC 0.4A / 277VAC
INRUSH CURRENT(Typ.)
COLD START 70A(twidth=485μs measured at 50% Ipeak) at 230VAC
MAX. No. of PSUs on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT
<0.75mA / 277VAC

PROTECTION

OVER CURRENTNote.4
95 ~ 108% Protection type : Constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT
Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE
54 ~ 63V
OVER TEMPERATURE
Shut down o/p voltage, re-power on to recover

ENVIRONMENT

WORKING TEMP.
-40 ~ +50℃ (Refer to "Derating Curve")
WORKING HUMIDITY
20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY
-40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT
±0.03%/℃ (0 ~ 40℃)
VIBRATION
10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDSNote.7
UL8750, CSA C22.2 No. 250.0-08, BS EN/EN 61347-1, BS EN/EN 61347-2-13 independent ; IP64, EAC TP TC 004 approved ; Design refer to UL60950-1
WITHSTAND VOLTAGE
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION
Compliance to BS EN/EN55015, BS EN/EN61000-3-2 Class C (≧60% load, 12V model ≧65% load) ; BS EN/EN61000-3-3, EAC TP TC 020
EMC IMMUNITY
Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN61547, BS EN/EN55024, light industry level (surge 4KV), criteria B, EAC TP TC 020

OTHERS

MTBF
2786.8K hrs min. Telcordia SR-332(Bellcore) ; 316.2K hrs min. MIL-HDBK-217F (25℃)
DIMENSION
181*61.5*35mm (L*W*H)
PACKING
0.5Kg; 24pcs/13Kg/0.87CUFT

Certifications & ratings

Marked features
110
Test conditions and notes13
  1. 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
  2. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
  3. 3. Tolerance : includes set up tolerance, line regulation and load regulation.
  4. 4. Please refer to "DRIVING METHODS OF LED MODULE".
  5. 5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
  6. 6. A type only.
  7. 7. Safety and EMC design refer to EN60598-1, CNS15233, FCC part18.
  8. 8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
  9. 9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
  10. 10. To fulfill requirements of the latest ErP regulation for lighting fixtures, this LED power supply can only be used behind a switch without permanently connected to the mains.
  11. 11. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
  12. 12. This product is not suitable for LED lighting applications in China.(It is recommended to use the LPF/NPF/XLG/XLC/XLN series in China)
  13. 13. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf

Technical drawings

HLN-80H-48A Mechanical Specification
Mechanical Specification
HLN-80H-48A Block Diagram
Block Diagram
HLN-80H-48A Derating Curve
Derating Curve
HLN-80H-48A Power Factor Characteristic
Power Factor Characteristic
HLN-80H-48A EFFICIENCY vs LOAD (48V Model)
EFFICIENCY vs LOAD (48V Model)
HLN-80H-48A H L N - 8 0 H series
H L N - 8 0 H series
HLN-80H-48A H L N - 8 0 H series (2)
H L N - 8 0 H series (2)
HLN-80H-48A DIMMING OPERATION(for B-type only)
DIMMING OPERATION(for B-type only)
HLN-80H-48A ※ Please DO NOT connect "DIM-" to "-V".
※ Please DO NOT connect "DIM-" to "-V".
HLN-80H-48A H L N - 8 0 H series
H L N - 8 0 H series
HLN-80H-48A H L N - 8 0 H series (2)
H L N - 8 0 H series (2)

Downloads

FAQ

Can I use the HLN-80H-48A for outdoor LED sign lighting?

Yes, it is suitable for signage applications and has an IP64 enclosure for dust and splashing-water protection. Electrically, the LED load needs to match a constant-current driver with 1.7A output across a 28.8-48V range.

Is the HLN-80H-48A a good fit for constant-current linear lighting runs?

It can be used for constant-current linear lighting if the run is built around a 1.7A LED load operating within 28.8-48V. The driver is rated for 81.6W maximum output, so the full run has to stay within that power ceiling.

Can this driver power 48V-class constant-current LED modules for display lighting?

Yes, that is the kind of application this model is aimed at when the module string needs constant current rather than constant voltage. The load should be compatible with 1.7A output and stay inside the 28.8-48V constant-current window.

How do I estimate LED strip length for the HLN-80H-48A?

Use the driver’s 81.6W maximum output and divide by the strip’s rated watts per meter: 81.6 ÷ strip watts per meter = estimated maximum length. Check your strip rated power per meter and make sure the strip system is designed for constant-current operation in the 28.8-48V range.

Is the HLN-80H-48A suitable for wet or cold environments?

It is rated IP64, so it is appropriate where dust protection and resistance to splashing water are needed. The specified operating temperature range is -40°C to +50°C, which supports both cold-weather and higher-ambient installations within that band.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Other HLN-80H Models

16 other models
ModelPowerVoltageCurrentIP Rating
Mean Well HLN-80H-54B Power Supply 80W 54V - IP64, Dimmable 1.5A 81W 54V 1.5A IP64 View
Mean Well HLN-80H-54A Power Supply 80W 54V - IP64, Adjustable 1.5A 81W 54V 1.5A IP64 View
Mean Well HLN-80H-48B Power Supply 80W 48V - IP64, Dimmable 1.7A 81.6W 48V 1.7A IP64 View
Mean Well HLN-80H-42B Power Supply 80W 42V - IP64, Dimmable 1.95A 81.9W 42V 1.95A IP64 View
Mean Well HLN-80H-42A Power Supply 80W 42V - IP64, Adjustable 1.95A 81.9W 42V 1.95A IP64 View
Mean Well HLN-80H-36B Power Supply 80W 36V - IP64, Dimmable 2.3A 82.8W 36V 2.3A IP64 View
Mean Well HLN-80H-36A Power Supply 80W 36V - IP64, Adjustable 2.3A 82.8W 36V 2.3A IP64 View
Mean Well HLN-80H-30B Power Supply 80W 30V - IP64, Dimmable 2.7A 81W 30V 2.7A IP64 View
Mean Well HLN-80H-30A Power Supply 80W 30V - IP64, Adjustable 2.7A 81W 30V 2.7A IP64 View
Mean Well HLN-80H-24A Power Supply 80W 24V - IP64, Adjustable 3.4A 81.6W 24V 3.4A IP64 View
Mean Well HLN-80H-20B Power Supply 80W 20V - IP64, Dimmable 4A 80W 20V 4A IP64 View
Mean Well HLN-80H-20A Power Supply 80W 20V - IP64, Adjustable 4A 80W 20V 4A IP64 View
Mean Well HLN-80H-15B Power Supply 75W 15V - IP64, Dimmable 5A 75W 15V 5A IP64 View
Mean Well HLN-80H-15A Power Supply 75W 15V - IP64, Adjustable 5A 75W 15V 5A IP64 View
Mean Well HLN-80H-12B Power Supply 60W 12V - IP64, Dimmable 5A 60W 12V 5A IP64 View
Mean Well HLN-80H-12A Power Supply 60W 12V - IP64, Adjustable 5A 60W 12V 5A IP64 View
View all 51 HLN Series models
{ "id":8423796605227, "variants" :[{ "context":"default", "variant_id": 45635758686507, "sku":"HLN-80H-48A", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Mean Well HLN-80H-48A Power Supply 80W 48V - IP64, Adjustable 1.7A
Mean Well

Mean Well HLN-80H-48A Power Supply 80W 48V - IP64, Adjustable 1.7A

Log in to see price

HLN-80H-48A is the 48V output model of this series: rated current 1.7A, rated power 81.6W, typical efficiency 91%.

Features

  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Over current / Over voltage / Over temperature
  • Cooling by free air convection
  • OCP point adjustable through output cable or internal potentiometer
  • Fully isolated plastic case with IP64 level
  • Class 2 power unit
  • Three in one dimming function (1~10Vdc or PWM signal or resistance)
  • Suitable for LED lighting, Industrial Lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • Suitable for dry / damp locations or outdoor application
  • 3 years warranty
View product

  • Call us

    0800 88 87 86

  • Email us

    contact@wellforces.co.nz

  • Business Hours

    Mon-Fri 8:30am-5:00pm

  • Wholesale and Trade Account

    Let's grow together
Back to top