Ltech LT-880-350 Constant Current Decoder - DMX/RDM

The LT-880-350 supports both DMX512 and RDM control. Its RDM capability allows bi-directional communication for remote device management, including reading and writing the DMX address when the master controller recognizes RDM. This makes it more flexible than a DMX-only decoder in managed lighting systems.

This model is designed for constant current LED lighting systems that need DMX-based dimming and control. It can control single-color, bi-color, and RGB LED lights, which makes it suitable for commercial and architectural lighting projects using a DMX512 console. Its 0-100% brightness control also supports scenes and changing lighting effects.

The LT-880-350 supports an output voltage range of 3~46Vdc and a constant current of 350mA per channel across 16 channels. The maximum total output power is 257.6W. It is a constant current decoder, so it is intended for lighting systems that match that current requirement. These specifications are important when selecting a decoder for a specific LED fixture or project load.

Yes. This model includes standard RDM remote device management protocol support, which enables bi-directional DMX512 communication. In practical terms, that allows remote reading and writing of the DMX address when used with an RDM-compatible master controller.

The LT-880-350 is specified for operation from -30 degrees C to 65 degrees C. That wide operating range makes it suitable for installations exposed to cold winters, hot equipment spaces, or other demanding ambient conditions. Environmental suitability should still be evaluated against the full enclosure and system design.

A key differentiator is its support for both DMX512 dimming and RDM remote management. It also supports 0-100% brightness control and works with single-color, bi-color, and RGB LED lights, giving it broader project flexibility. For B2B buyers, that can simplify model selection for managed lighting systems that need addressable control and maintenance access.