Over 15 years experience of providing support of MEAN WELL Power Supplies
Image shown is a representation only. Exact specifications should be obtained from the product datasheet.
Mean Well GC30B-11P1J Portable Chargers 21.6W 7.2V 3A - Green Adaptor
Log in to see priceOverview
GC30B-11P1J is the model of this series: rated current 3A, rated power 21.6W, typical efficiency 74%.
Features
- Charger for lead-acid batteries (flooded, Gel and AGM) and li-ion batteries (lithium iron and lithium manganese)(Note.1)
- Universal AC input / Full range
- 2 pole AC Inlet IEC320-C8
- Class II power (without earth pin)
- No load power consumption <1.0W
- Constant current and voltage(CC,CV mode)
- Suitable for continue load
- For high surge current equipment
- Protections: Short circuit / Overload / Over voltage / Over temp.
- 2 colors LED indicate for charging status
- Fully enclosed plastic case
- High reliability
- Approvals: UL / CUL / TUV / EAC / CB / FCC / CE / UKCA
- 2 years warranty
Specifications
OUTPUT
- SAFETY MODEL NO.
- GC30B-11
- DC VOLTAGE SET ATNote.3
- 7.2V
- RATED CURRENT
- 3A
- CURRENT RANGE
- 0 ~ 3A
- RATED POWER
- 21.6W
- RIPPLE & NOISE (max.)Note.4
- 80mVp-p
- CHARGING VOLTAGE RANGENote.5
- 6.5 ~ 7.5V
- LINE REGULATIONNote.6
- Β±0.5%
- LED INDICATOR
- Green LED ON < 100mA, Red LED ON > 250mA
- SETUP, RISE, HOLD UP TIME
- 200ms, 50ms, 16ms at full load
INPUT
- VOLTAGE RANGE
- 90 ~ 264VAC 127 ~ 370VDC
- FREQUENCY RANGE
- 47 ~ 63Hz
- EFFICIENCY (Typ.)
- 74%
- AC CURRENT
- 0.7A /100VAC; 0.35A/230VAC
- INRUSH CURRENT (max.)
- 40A/230VAC
- LEAKAGE CURRENT(max.)
- 0.25mA /240VAC
PROTECTION
- OVERLOAD
- 90 ~ 110% Constant current mode and over 300% pulsing mode Protection type : Constant current limiting, recovers automatically after fault condition is removed
- OVER VOLTAGE
- 110 ~ 135% rated output voltage Protection type : Clamp by zener diode
- OVER TEMPERATURE
- IC1_Tj > 130β Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
ENVIRONMENT
- WORKING TEMP.
- 0 ~ +50β(Refer to output load derating curve)
- WORKING HUMIDITY
- 20% ~ 90% RH non-condensing
- STORAGE TEMP., HUMIDITY
- -20 ~ +85β, 10 ~ 95% RH
- TEMP. COEFFICIENT
- Β±0.03% / β (0 ~ 50β)
- VIBRATION
- 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY & EMC
- SAFETY STANDARDS
- UL62368-1, CSA22.2, BS EN/EN62368-1, EAC TP TC 004 approved
- WITHSTAND VOLTAGE
- I/P-O/P:3KVAC
- ISOLATION RESISTANCE
- I/P-O/P:100M Ohms / 500VDC / 25β/ 70% RH
- EMC EMISSION
- Compliance to BS EN/EN55014-1 class B, FCC part 15 Class B, EAC TP TC 020
- EMC IMMUNITY
- Compliance to BS EN/EN61000-4-2,3,4,5,6,11, light industry level, criteria A, EAC TP TC 020
OTHERS
- DIMENSION
- 108*67*36mm (L*W*H)
- PACKING
- 309g; 54pcs / 19kg / CARTON
CONNECTOR
- PLUG
- Standard type P1J: 2.1Ο * 5.5Ο * 11mm, tuning fork type center positive for stock ; Other type available by customer requested
- CABLE
- Standard type 18Awg UL1185 6ft and 4ft for 4.2V~8.4V output only for stock ; Other type available by customer requested
Test conditions and notes6
- 1.Modification for charger specification may be required for different battery specification. Please contact battery vendor and MEAN WELL for details.
- 2.All parameters are specified at 230VAC input, rated load, 25β 70% RH ambient.
- 3.DC voltage: The output voltage set at point measure by plug terminal & 0% load.
- 4.Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor.
- 5.Output charging voltage range is measured from 0% to 100% rated load.
- 6.Line regulation is measured from low line to high line at rated load.
Technical drawings
Downloads
Certificates8
Catalogues1
FAQ
What type of batteries is the Mean Well GC30B-11P1J designed for?
The GC30B-11P1J is intended for charging 7.2V battery systems and is described for use with lead-acid batteries, including flooded, gel, and AGM types, as well as certain Li-ion chemistries. This makes it a portable charger option for buyers needing support across several common battery technologies. Buyers should confirm the battery chemistry and charging profile match their equipment requirements before purchase.
What are the main output specifications of the GC30B-11P1J?
This model is rated at 21.6W with a 7.2V output and 3A rated current. Those specifications make it suitable for applications that need a compact charger in this voltage and current range. It operates in constant current and constant voltage modes.
Is the GC30B-11P1J suitable for portable or field-use equipment?
Yes, this model is positioned as a portable charger in a compact case measuring 108 x 67 x 36 mm. Its relatively light 309g weight also makes it practical where a small external charger is preferred. It is often a fit for portable battery-powered equipment needing a 7.2V charging solution, within its 0 to 50Β°C working range.
What input range does the Mean Well GC30B-11P1J support?
The GC30B-11P1J supports a universal AC input range of 90 to 264VAC, and also lists 127 to 370VDC input capability. This broad input range helps buyers using the charger across different regions or power environments. The input frequency range is 47 to 63Hz.
Can the GC30B-11P1J be used in demanding operating environments?
This charger is specified for operation from 0Β°C to 50Β°C, subject to the manufacturer's derating guidance. It also includes protections for overload, over-voltage, and over-temperature, which adds resilience in commercial use. For indoor or controlled-environment applications within that temperature range, it is a practical option.
How can buyers tell the charging status on this model?
The GC30B-11P1J includes a 2-color LED indicator for charging status: red while charging and green during float charging. That gives users a simple visual status check without needing additional monitoring hardware. This is useful for routine bench, service, and portable equipment charging workflows.
What certifications and warranty does the GC30B-11P1J include?
This model lists safety standards UL62368-1, CSA22.2, BS EN/EN62368-1, and EAC TP TC 004, with EMC emission compliance to BS EN/EN55014-1 Class B, FCC Part 15 Class B, and EAC TP TC 020. The datasheet does not state a warranty period, so buyers should confirm warranty terms with the seller.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Other GC30 Models
20 other modelsPlease log in to write a review.
Write a review
Reviews are checked before publishing. By submitting you confirm this is your genuine experience with this product.
Submitting your reviewβ¦
It's published and now helps other buyers.
We're checking it and it'll appear shortly.
Please try again.
