💡 New range: Boke DALI-2 LED drivers | 10–240 W | 5-year warranty Explore the range

Over 15 years experience of providing support of MEAN WELL Power Supplies

Image shown is a representation only. Exact specifications should be obtained from the product datasheet.

Envo EV-S-IR IR Sensor - Handwave Mode

SKU EV-S-IR
Log in to see price Trade pricing & online ordering for account holders
Available to order
|

Overview

The EV-S sensors are infrared and touch switches for low-voltage LED lighting in wardrobes, cabinets and similar spaces. They work on 12Vdc or 24Vdc and are used with a matching dedicated power supply, plugged into the driver's control port. Each sensor head fits a 12.2mm hole. The EV-S-IR is the infrared head, with a hand-wave mode and three door-control modes.

Features

  • 12Vdc and 24Vdc operation
  • Modular: sensor heads of the series are interchangeable
  • Concealed or open installation
  • Quick plug and play connector, 2000mm lead
  • IP20, indoor use, 5-year warranty
  • Hand-wave mode plus three door-control modes

Specifications

Envo EV-S-IR IR Sensor - Handwave ModeSpecifications from the official datasheet

Variants

SKU
EV-S-IR

Function and Modes

Mode 0 — Hand wave (factory default)
Wave to turn the light on; wave again to turn it off.
Mode 1 — Door control 1
Light on when the door is open; off when the door is closed.
Mode 2 — Door control 2
Light on when the door is open; 10% brightness when the door is closed.
Mode 3 — Door control 3
Light on when the door is open; 20% brightness when the door is closed.

Input

Operating voltage
12Vdc / 24Vdc
Load
Determined by the output voltage of the power supply
Standby power
<0.5W
Compatibility
ENVO SNS-36/60/100

Operating Conditions

Ambient temperature (ta)
−20 to 40°C
Detection range
4–6cm
Use
Indoor

Mechanical

Sensor head (Ø × L)
18.5 × 20mm
Hole size
12.2mm
Lead length
2000mm
Weight
28g
Installation
Concealed or open
Optional base
EV-S-Sensor-Base
Connector
Quick plug and play connector
Ingress protection
IP20

Compliance & Warranty

Marks
CE, UKCA, RCM
Warranty
5 years
Test conditions and notes4
  1. Plug the sensor cable into the control port of the power supply and connect the light fixture to the power output.
  2. Use only with a matching dedicated power supply, otherwise the sensor will be damaged.
  3. IR mode change: cover the probe for more than 1s to step to the next mode; leave it for 10s to confirm.
  4. IR mode feedback: Mode 0 flashes quickly, Mode 1 twice, Mode 2 three times, Mode 3 four times, then 2s off; repeats.

Typical applications

  • Low-voltage LED lighting in wardrobes, cabinets and similar spaces.

Downloads

::specification::

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Other ENVO Sensor Series Models

50 other models
ModelIP RatingDimmingLifetime
Envo EV-SNT-15-24 Super Thin LED Driver 15W 24V 625mA IP20 Non Dimmable — View
Envo EV-SNT-20-24 Super Thin LED Driver 20W 24V 833mA IP20 Non Dimmable — View
Envo SC-30-24 Power Supply 30W 24V - Triac dimmable 1.25A IP20 AC Phase Cut Dimming — View
Envo SC-60-24 Power Supply 60W 24V - Triac dimmable 2.5A IP66 AC Phase Cut Dimming — View
Envo SC-200-24 Power Supply 200W 24V - Triac dimmable 8.33A IP66 AC Phase Cut Dimming — View
Envo SC-100-24 Power Supply 100W 24V - Triac dimmable 4.16A IP66 AC Phase Cut Dimming — View
Envo EV-SNR-75-24 LED Driver 75W 24V 3.12A IP20 Non Dimmable — View
Envo SC-80-24 Power Supply 80W 24V - Triac dimmable 3.33A IP66 AC Phase Cut Dimming — View
Envo SC-150-24 Power Supply 150W 24V - Triac dimmable 6.25A IP66 AC Phase Cut Dimming — View
Envo SC-20-24 Power Supply 20W 24V - Triac dimmable 830mA IP20 AC Phase Cut Dimming — View
Envo EV-SNP-100-24 LED Driver 100W 24V Waterproof IP67 4.17A IP67 Non Dimmable — View
Envo S-EV-SNR-30-24 LED Driver 30W 24V with 1m NZ Plug 1.25A IP20 Non Dimmable — View
Envo EV-SNL-100-24 Linear Type LED Driver 100W 24V 4.17A IP20 Non Dimmable — View
Envo SC-360-24 Power Supply 360W 24V - Triac dimmable 15A IP66 AC Phase Cut Dimming — View
AC Triac Dimmable driver 200-240Vac 300W 24V No Load Requirement 12.5A IP66 AC Phase Cut Dimming — View
Envo S-EV-SNR-60-24 LED Driver 60W 24V with 1m NZ Plug 2.5A IP20 Non Dimmable — View
ENVO SR-2701S-DT7 Relay On/Off Control, Configurable Single Address IP20 DALI,DALI2 — View
Envo EV-SNP-60-24 LED Driver 60W 24V Waterproof IP67 2.5A IP67 Non Dimmable — View
Envo SC-36-24 Power Supply 36W 24V 1.5A - Triac dimmable IP20 AC Phase Cut Dimming — View
Envo EV-SNP-35-24 LED Driver 35W 24V Waterproof IP67 1.45A IP67 Non Dimmable — View
Envo EV-SNT-15-12 Super Thin LED Driver 15W 12V 1.25A IP20 Non Dimmable — View
Envo EV-SNL-60-24 Linear Type LED Driver 60W 24V 2.5A IP20 Non Dimmable — View
Envo Slim SC-100S-24 Power Supply 100W 24V - Triac dimmable 4.17A IP20 AC Phase Cut Dimming — View
Envo SC-10-24 Power Supply 10W 24V - Triac dimmable 420mA IP20 AC Phase Cut Dimming — View
Envo EV-SNP-24-24 LED Driver 24W 24V Waterproof IP67 1A IP67 Non Dimmable — View
Envo EV-SNL-200-24 Linear Type LED Driver 200W 24V 8.33A IP20 Non Dimmable — View
Envo EV-SNL-150-24 Linear Type LED Driver 150W 24V 6.25A IP20 Non Dimmable — View
ENVO SR-2701S-N Relay On/Off Control + SR-2701S-N to 0/1-10V Converter, Configurable Single Address IP20 0-10V,1-10V,DALI — View
Envo EV-SNP-60-12 LED Driver 60W 12V Waterproof IP67 5A IP67 Non Dimmable — View
Envo Slim SC-60S-24 Power Supply 60W 24V - Triac dimmable 2.5A IP20 AC Phase Cut Dimming — View
Envo EV-SNG-350-12 LED Driver 300W 12V Waterproof IP67 25A IP67 Non Dimmable — View
Envo EV-SNP-100-12 LED Driver 100W 12V Waterproof IP67 8.3A IP67 Non Dimmable — View
Envo EV-SNR-60-12 LED Driver 60W 12V 5A IP20 Non Dimmable — View
Envo EV-SNR-30-12 LED Driver 30W 12V 2.5A IP20 Non Dimmable — View
AC Triac Dimmable driver 200-240Vac 300W 12V No Load Requirement 25A IP66 AC Phase Cut Dimming — View
ENVO ENC-12-300 Dimmable LED Driver 7.5W-12W 300mA Constant Current IP20 AC Phase Cut Dimming — View
Envo EV-SNG-350-24 LED Driver 350W 24V Waterproof IP67 14.58A IP67 Non Dimmable — View
Envo EV-SNT-20-12 Super Thin LED Driver 20W 12V 1.67A IP20 Non Dimmable — View
Envo SC-60-12 Power Supply 60W 12V - Triac dimmable 5A IP66 AC Phase Cut Dimming — View
ENVO EcoGlo LED Module Backlit - Double LED IP67 Dimmable 50000h View
Envo SC-150-12 Power Supply 150W 12V - Triac dimmable 12.5A IP66 AC Phase Cut Dimming — View
Envo SC-100-24-US Power Supply 100W 24V - Triac dimmable 4.17A IP66 AC Phase Cut Dimming — View
Envo SC-100-12 Power Supply 100W 12V - Triac dimmable 8.33A IP66 AC Phase Cut Dimming — View
ENVO ENC-18-500 Dimmable LED Driver 9W-18W 500mA Constant Current IP20 AC Phase Cut Dimming — View
ENVO SR-2303SAC-HP to Triac Dimmer, 1 Channel, 400W Max, Single Colour IP20 DALI — View
ENVO PRO SR-2309PRO-5C DT8 LED Controller RGBWW 5 CH 12-36VDC IP20 DALI — View
ENVO Movement PIR Sensor with Probe, DC, Indoor IP20 Non Dimmable 50000h View
ENVO UltraFlare LED Module Backlit - Double LED IP67 Dimmable 50000h View
ENVO MiniLux LED Module Backlit - Duo LED IP67 Dimmable 50000h View
Envo SC-60-24-US Power Supply 60W 24V - Triac dimmable 2.5A IP66 AC Phase Cut Dimming — View
{ "id":15786093478254, "variants" :[{ "context":"default", "variant_id": 68397468451182, "sku":"EV-S-IR", "inventory_qty" : 0, "customer" :false, "custom_html" :"\u003ca class=\"text-current logged-out-price logged-out\" href=\"https:\/\/wellforces.co.nz\/customer_authentication\/redirect?locale=en\u0026region_country=NZ\"\u003e\n \u003cspan \u003ePlease \u003c\/span\u003e \u003cspan class=\"login-text\"\u003eLogin\u003c\/span\u003e \u003cspan\u003e for Pricing\u003c\/span\u003e\n \u003c\/a\u003e", "volume_html" :"\u003cvolume-pricing class=\"parent-display inside_product_form\" id=\"volume-pricing-main\" \u003e\u003c\/volume-pricing\u003e" } ] }
Envo EV-S-IR IR Sensor - Handwave Mode
Envo

Envo EV-S-IR IR Sensor - Handwave Mode

The ENVO EV-S-IR is a miniature infrared sensor switch for 12V and 24V DC LED lighting, designed to sit inside wardrobes, cabinets and joinery where a conventional switch would be awkward to reach. The probe fits a Ø12.2 mm hole, so it recesses almost invisibly into a shelf edge or carcase panel, and the optional EV-S-Sensor-Base allows surface mounting where drilling is not an option.

Four operating modes are selectable on site. Out of the box it works as a hand-wave switch: pass a hand within 4-6 cm to turn the light on, wave again to turn it off. It can also be set to door-control operation, switching the light on when the door opens and either off, or down to a 10% or 20% night-light level, when the door closes. Because infrared sensing depends on the colour and finish of the surface it reads against, a silver target sticker is supplied for dark or difficult materials.

Key Features

View product